HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Access</strong> <strong>Point</strong> Configuration<br />
Configuring SNTP<br />
5-22<br />
■ Enable Daylight Saving: The access point provides a way to automatically<br />
adjust the system clock for Daylight Saving Time (DST) changes. To<br />
use this feature you define the month and date to begin and to end the<br />
change from standard time. During this period the system clock is set back<br />
by one hour.<br />
To Set SNTP Parameters:<br />
1. Select the Administration tab.<br />
2. Click the [System Servers] button.<br />
3. For SNTP Server, select Enable.<br />
4. For the primary time server, type the IP address in the Primary Server field.<br />
5. For the secondary time server, type the IP address in the Secondary Server<br />
field.<br />
6. From the Enter Time Zone drop-down menu, select the time appropriate for<br />
your region.<br />
7. (Optional) If your region uses Daylight Saving Time, check the Enable<br />
Daylight Saving check box and then select the dates to implement this<br />
feature.<br />
8. Click the [Apply Changes] button.
Change language