HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Usage<br />
Command Line Reference<br />
Filtering Commands<br />
This command is used in conjunction with the filter ethernet-type protocol<br />
command to determine which Ethernet protocol types are to be filtered.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#filter ethernet-type enable<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
filter ethernet-type protocol (page 6-49)<br />
filter ethernet-type protocol<br />
This command sets a filter for a specific Ethernet type. Use the no form to<br />
disable filtering for a specific Ethernet type.<br />
Syntax<br />
filter ethernet-type protocol <br />
no filter ethernet-type protocol <br />
protocol - An Ethernet protocol type.<br />
– Aironet-DDP<br />
– Appletalk-ARP<br />
– ARP<br />
– Banyan<br />
– Berkeley-Trailer-Neg<br />
– CDP<br />
– DEC-LAT<br />
– DEC-MOP<br />
– DEC-MOP-Dump-Load<br />
– DEC-XNS<br />
– EAPOL<br />
– Enet-Config-Test<br />
– Ethertalk<br />
– IP<br />
– LAN-Test<br />
– NetBEUI<br />
– Novell-IPX(new)<br />
– Novell-IPX(old)<br />
– RARP<br />
– Telxon-TXP<br />
– X25-Level-3<br />
6-49
Change language