HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
System Management Commands<br />
6-22<br />
Example<br />
This sets daylight savings time to be used from March 31st to October 31st.<br />
<strong>HP</strong><strong>420</strong>(config)#sntp-server daylight-saving<br />
Enter Daylight saving from which month: 3<br />
and which day: 31<br />
Enter Daylight saving end to which month: 10<br />
and which day: 31<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
sntp-server timezone<br />
This command sets the time zone for the access point’s internal clock.<br />
Syntax<br />
sntp-server timezone <br />
hours - Number of hours before/after UTC. (Range: -12 to +12 hours)<br />
Default Setting<br />
None<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
This command sets the local time zone relative to the Coordinated<br />
Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on<br />
the earth’s prime meridian, zero degrees longitude. To display a time<br />
corresponding to your local time, you must indicate the number of hours<br />
and minutes your time zone is east (before) or west (after) of UTC.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#sntp-server timezone +8<br />
<strong>HP</strong><strong>420</strong>(config)#
Change language