HP ProCurve Wireless Access Point 420 - Hewlett Packard

Access Point Configuration
Configuring Wireless Security
5-62
• Alphanumeric: Enter keys as 5 alphanumeric characters for 64 bit
keys, 13 alphanumeric characters for 128 bit keys, or 16 alphanumeric
characters for 152 bit keys.
■ Transmit Key Select: Selects the key number to use for encryption.
To Configure WEP Shared Keys:
1. Select the Security tab.
2. Click the [Shared Key Setup] button.
3. Set the Authentication Type Setup to Shared Key.
4. Set Wired Equivalent Privacy (WEP) Setup to Enabled.
5. Select the size of the encryption key to be used by all clients, 64 bit, 128 bit,
or 152 bit.
6. Select the method to enter the keys, Hexadecimal or Alphanumeric.
7. Enter one or more keys in the table conforming the method and size
already selected.
8. Select one of the entered keys as the Transmit Key to be used to encrypt
data transmitted from the access point. Other keys can be shared with
clients and used for decryption.
9. Click the [Apply Changes] button.