HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
Filtering Commands<br />
6-50<br />
Default<br />
None<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
Use the filter ethernet-type enable command to enable filtering for Ethernet<br />
types specified in the filtering table, or the no filter ethernet-type enable<br />
command to disable all filtering based on the filtering table.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#filter ethernet-type protocol ARP<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
filter ethernet-type enable (page 6-48)<br />
show filters<br />
This command shows the filter options and protocol entries in the filter table.<br />
Command Mode<br />
Exec<br />
Example<br />
The example below shows ARP frames filtered indicating its Ethernet<br />
protocol ID (0x0806).<br />
<strong>HP</strong><strong>420</strong>#show filters<br />
Protocol Filter Information<br />
=========================================================<br />
Local Bridge :ENABLED<br />
AP Management :ENABLED<br />
Ethernet Type Filter :ENABLED<br />
Enabled Protocol Filters<br />
---------------------------------------------------------<br />
Protocol: ARP ISO: 0x0806<br />
=========================================================<br />
<strong>HP</strong><strong>420</strong>#
Change language