HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Line Reference<br />
System Management Commands<br />
6-14<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
To avoid using common reserved TCP port numbers below 1024, the<br />
configurable range is restricted to between 1024 and 65535. However, the<br />
default port number is 80. To reset the default port number, use the no ip<br />
http port command.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#ip http port 49153<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
ip http server (page 6-14)<br />
ip http server<br />
This command allows this device to be monitored or configured from a<br />
browser. Use the no form to disable this function.<br />
Syntax<br />
ip http server<br />
no ip http server<br />
Default Setting<br />
Enabled<br />
Command Mode<br />
Global Configuration<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#ip http server<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
ip http port (page 6-13)
Change language