HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
802.1x Port Authentication<br />
6-44<br />
Command Mode<br />
Global Configuration<br />
Command Mode<br />
• The access point supports up to 1024 MAC addresses.<br />
• An entry in the address table may be allowed or denied access<br />
depending on the global setting configured for the address filter default<br />
command.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#address filter entry 00-70-50-cc-99-1a allowed<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
address filter default (page 6-43)<br />
show authentication (page 6-46)<br />
address filter delete<br />
This command deletes a MAC address from the filter table.<br />
Syntax<br />
address filter delete <br />
Default<br />
None<br />
mac-address - Physical address of client. Enter six pairs of hexadecimal<br />
digits separated by hyphens.<br />
Command Mode<br />
Global Configuration<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#address filter delete 00-70-50-cc-99-1b<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
show authentication (page 6-46)
Change language