HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
delete<br />
This command deletes a file or image.<br />
Syntax<br />
delete filename<br />
filename - Name of the configuration file or image name.<br />
Default Setting<br />
None<br />
Command Mode<br />
Exec<br />
Command Line Reference<br />
Flash/File Commands<br />
Caution Beware of deleting application images from flash memory. At least one application<br />
image is required in order to boot the access point. If there are multiple<br />
image files in flash memory, and the one used to boot the access point is<br />
deleted, be sure you first use the bootfile command to update the application<br />
image file booted at startup before you reboot the access point. See“Downloading<br />
<strong>Access</strong> <strong>Point</strong> Software” on page A-3 for more information.<br />
Example<br />
This example shows how to delete the test.cfg configuration file from flash<br />
memory.<br />
<strong>HP</strong><strong>420</strong>#delete test.cfg<br />
Are you sure you wish to delete this file? :<br />
<strong>HP</strong><strong>420</strong>#<br />
Related Commands<br />
dir<br />
bootfile (page 6-31)<br />
dir (page 6-33)<br />
This command displays a list of files in flash memory.<br />
Command Mode<br />
Exec<br />
6-33
Change language