HP ProCurve Wireless Access Point 420 - Hewlett Packard

mac-authentication server
Command Line Reference
802.1x Port Authentication
This command sets address filtering to be performed with local or remote
options. Use the no form to disable MAC address authentication.
Syntax
mac-authentication server [local | remote]
Default
• local - Authenticate the MAC address of wireless clients with the
local authentication database during 802.11 association.
• remote - Authenticate the MAC address of wireless clients with the
RADIUS server.
local
Command Mode
Global Configuration
Example
HP420(config)#mac-authentication server remote
HP420(config)#
Related Commands
address filter entry (page 6-43)
radius-server address (page 6-35)
show authentication (page 6-46)
mac-authentication session-timeout
This command sets the interval at which associated clients will be re-authenticated
with the RADIUS server authentication database. Use the no form to
disable reauthentication.
Syntax
mac-authentication session-timeout
Default
seconds - Re-authentication interval. (Range: 0-65535)
0 (disabled)
6-45