HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
Flash/File Commands<br />
6-32<br />
Default Setting<br />
None<br />
Command Mode<br />
Exec<br />
Command Usage<br />
• The system prompts for data required to complete the copy<br />
command.<br />
• Only a configuration file can be uploaded to an FTP/TFTP server, but<br />
every type of file can be downloaded to the access point.<br />
• <strong>HP</strong> recommends not changing the name of a software image file when<br />
downloading a new software image. This name helps to quickly<br />
identify the software revision that the file contains.<br />
• Due to the size limit of the flash memory, the access point supports<br />
only two operation code files.<br />
• The configuration file must always be named "syscfg" prior to downloading<br />
it to the access point.<br />
Example<br />
The following example shows how to upload the configuration settings to a<br />
file on the TFTP server:<br />
<strong>HP</strong><strong>420</strong>#copy config tftp<br />
TFTP Source file name:syscfg<br />
TFTP Server IP:192.168.1.19<br />
<strong>HP</strong><strong>420</strong>#<br />
The following example shows how to download a configuration file:<br />
<strong>HP</strong><strong>420</strong>#copy tftp file<br />
1. Application image<br />
2. Config file<br />
3. Boot block image<br />
Select the type of download: [1]:2<br />
TFTP Source file name:syscfg<br />
TFTP Server IP:192.168.1.19<br />
<strong>HP</strong><strong>420</strong>#
Change language