HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
sntp-server ip<br />
Command Line Reference<br />
System Management Commands<br />
This command sets the IP address of the servers to which SNTP time requests<br />
are issued. Use this command with no arguments to clear all time servers from<br />
the current list.<br />
Syntax<br />
sntp-server ip <br />
• 1 - First time server.<br />
• 2 - Second time server.<br />
• ip - IP address of a time server (NTP or SNTP).<br />
Default Setting<br />
137.92.140.80<br />
192.43.244.18<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
When SNTP client mode is enabled using the sntp-server enable command,<br />
the sntp-server ip command specifies the time servers from which the<br />
access point polls for time updates. The access point will poll the time<br />
servers in the order specified until a response is received.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#sntp-server ip 10.1.0.19<br />
<strong>HP</strong><strong>420</strong>#<br />
Related Commands<br />
sntp server enable (page 6-20)<br />
show sntp (page 6-23)<br />
6-19
Change language