HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
HP ProCurve Wireless Access Point 420 - Hewlett Packard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Command Line Reference<br />
SNMP Commands<br />
6-28<br />
snmp-server host<br />
This command specifies the recipient of an SNMP notification. Use the no form<br />
to remove the specified host.<br />
Syntax<br />
snmp-server host <br />
no snmp-server host<br />
• host_ip_address - IP of the host (the targeted recipient).<br />
• host_name - Name of the host. (Range: 1-20 characters)<br />
• community-string - Password-like community string sent with the<br />
notification operation. Although you can set this string using the<br />
snmp-server host command by itself, we recommend that you define<br />
this string using the snmp-server community command prior to using<br />
the snmp-server host command. (Maximum length: 23 characters)<br />
Default Setting<br />
Host Address: None<br />
Community String: public<br />
Command Mode<br />
Global Configuration<br />
Command Usage<br />
The snmp-server host command is used in conjunction with the snmp-server<br />
enable server command to enable SNMP notifications.<br />
Example<br />
<strong>HP</strong><strong>420</strong>(config)#snmp-server host 10.1.19.23 batman<br />
<strong>HP</strong><strong>420</strong>(config)#<br />
Related Commands<br />
snmp-server enable server (page 6-27)
Change language