DCS User Manual EN.pdf

ED [DCS USER MANUAL]
To set the action, we will create a NEW action and set the ACTION to GROUP
ACTIVATE. From the GROUP drop down we will select the enemy air defense vehicle I
placed in the mission called AAA. In the unit placement window, there is also the option
to have activated unit visible or invisible before it is active in the world.
Set Mission Goals
When evaluating a mission for success, draw, or failure, the simulation uses point totals
that are assigned by the mission builder. If total points at the end of a mission are 49
or less, the mission is a failure; if total points equal 50, the mission is a draw. If total
points are 51 or higher, the mission is deemed a success. This point total is also used to
define which stage and mission may be chosen next in a campaign.
The same set of conditions used in the Trigger system is also used to define mission
goals. In the Goal window, the list of all created goals is displayed in the top pane.
Once a goal is selected by clicking on it, the conditions of the goal are listed in the
bottom pane.
102 DCS USER MANUAL