DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Example 1
User locks:
Group start time (Т 1 ), i.e. ETA for WP1;
ETA for the final waypoint (Т 4 );
In this case, the user doesn't control the speed and ETAs for waypoints 2 and 3 or the
speed for WP4. These values are calculated by the mission editor automatically. The
mission editor calculates the average speed for the route to reach WP4 at the
designated ETA. Note that the desired speed refers to the speed to the waypoint, i.e.
the speed the AI group will assume once it passes the preceding waypoint.
The AI group will attempt to adjust its speed for WP2, WP3 and WP4 as necessary to
arrive at WP4 at the locked ETA.
110 DCS USER MANUAL