DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Join
Rather than host a mission as a server, you also have the option to join an existing
Server/Mission that is already in progress. There are two ways to do so:
Join a mission listed on a Server List.
Connect directly to a server IP by using the Connect by IP option.
Joining a Mission
From Server List
After you have selected a server from the Server List, press the JOIN button at the
bottom of the screen to join the server.
Connect by IP
To connect to a game over the Internet, you use the Connect by IP option. To do so,
press the Connect by IP button. Upon doing so, the Connect by IP window will be
displayed.
This window consists of two fields:
IP/URL: Enter the IP number or URL of the server you wish to join.
PASS: If the server is password protected, enter the password into this field. If
the server is not password protected, you may leave this field blank.
After completing these fields, you can either press the CANCEL button to exit the
window and not join the server, or press the OK button to join the server.
Join Window
After you have joined a mission (Server List or Connect by IP), you are directed to the
Join Window. From this window you may select a side, select your aircraft, chat with
233 DCS USER MANUAL