DCS User Manual EN.pdf

ED [DCS USER MANUAL]
The INU Fix Point button opens the INU FIX POINT panel. This panel is used to place
reference points with known earth coordinates for the Inertial Navigation Unit (INU) of
the player aircraft. These points can be used to update the INU when flying over or
designating them using the targeting system. Usually visible landmarks are used as
update locations, such as bridges or other easily identified landmarks.
The coordinates of the point will appear in the INU FIX POINT panel. Fix Points can be
placed directly on the map using the mouse in ADD mode or moved over the map in
EDIT mode. Pressing the DEL button will delete the fix point.
Target Point mode
The Target Point mode allows you to set target points for the navigation system.
Target Points can be used by the mission designer to designate coordinate points on the
ground as targets. These points can be selected by the pilot in flight using the "OT"
button on the navigation system and are indicated on the PVI-800 and ABRIS displays.
Target Points Panel
Target Point Number
Target
Target Point #1
stored as "TRG01"
Comment
Target Point Coordinates
132 DCS USER MANUAL