DCS User Manual EN.pdf

ED [DCS USER MANUAL]
New Server
For a mission to run as a multiplayer game, one user must be set up as a Server (host)
that runs the mission that other players (clients) can join. This is done as either a
mission listing on a server list or as a direct IP connection.
Note, it is recommended that mission hosts run the simulation in windowed mode to
avoid problems when using the ALT-TAB function to switch between windows.
To start a mission Server, select the Server button on the Main Multiplayer Menu screen.
Server Options
Mission Description
Select Mission
The Server screen has three main areas: Server Options, Mission Description, and Select
Mission. After you have selected a mission and set the server options, you will press the
START button at the bottom of the screen to start the server and allow clients to join it.
It will also direct you to the Join Mission screen.
Server Options. The Server Options allow you to setup and view the basic parameters
of the mission server. Some of the items can be modified and some are information
only and cannot be modified. These are:
230 DCS USER MANUAL