DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Advanced Actions Mode (ground groups)
Pressing the Advanced tab open the Advanced Actions Panel, which lists the actions
associated with the selected waypoint:
This panel is used to set (add/edit/delete) group actions (Tasks, Enroute Tasks,
Commands, Options), which are tasked to the AI at this waypoint by the user or
generated automatically by the Mission Editor.
Action Properties Panel for Ground Groups
The Action Properties Panel for Ground Groups is analogous to the panel for aircraft
groups. In other words, this panel is used to set Tasks, Enroute Tasks, Commands and
Options for the group to perform, as well as the starting and ending conditions of the
actions. However, the specific types of actions available for naval groups differs from
aircraft groups.
Tasks
No Task
No action is assigned to the group to perform.
FAC - Assign Group
This task creates a Forward Air Controller (FAC) to direct friendly aircraft onto a target
group designated by the mission designer. To achieve full FAC functionality, the FAC unit
should be an armed vehicle with direct line of sight to the target and placed within a few
kilometers range.
Targeting actions will begin when friendly units arrive in the area and establish
communication with the FAC.
195 DCS USER MANUAL