DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Heliports that allow the placement of a Forward Arming and Refueling Point
(FARP) for forward helicopter operations. When setting a FARP, you can choose
the FARP callsign for radio communications from the CALLSIGN drop-down menu
and set the radio frequency in MHz in the FREQUENCY field.
Planes that include fixed-wing aircraft of the selected country.
Ships that belong to the selected country.
Structures which includes pill boxes and many other types of buildings (military
and civil).
TYPE. Depending on the Category selection, a list of appropriate units is listed in this
pull down list.
HEADING. You may use this control to set the heading of the unit in the simulation
world. You can do this by either using the left and right arrow keys, typing in the
heading value, or clicking on the heading dial.
HIDDEN. If you wish to hide the static object on the World Map and make it invisible to
players in the briefing map, check this box.
DEAD. In addition to the normal static object, you may also populate the world with the
destroyed version of the object by checking the DEAD box.
Note, the mission editor supports group copy/paste functionality. To copy a group,
select it and press CTRL+C. To paste the group with identical properties, position the
mouse over the desired point on the map and press CTRL+V.
201 DCS USER MANUAL