DCS User Manual EN.pdf

ED [DCS USER MANUAL]
In this case, the user controls the ETA for WP4 and also the travel speed for WP2 and
WP4. Such a route is valid, because there is at least one waypoint (in this case WP3)
between the starting and ending waypoints, which has both the speed and ETA
unlocked, allowing the mission editor to automatically calculate both values as needed to
meet the desired settings for WP1, WP2 and WP4.
The AI group will attempt to adjust its speed for WP3 such that it will arrive at WP4 at
the designated ETA and desired speed.
The mission editor automatically calculates the ETA for WP2 and WP3, as well as the
desired speed for WP3:
115 DCS USER MANUAL