DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Advanced Actions Mode(naval groups)
Pressing the Advanced tab opens the Advanced Actions Panel, which lists the actions
associated with the selected waypoint:
This panel is used to set (add/edit/delete) group actions (Tasks, Enroute Tasks,
Commands, Options), which are tasked to the AI at this waypoint by the user or
generated automatically by the Mission Editor.
Action Properties Panel for Naval Groups
The Action Properties Panel for Naval Groups is analogous to the panel for aircraft
groups. In other words, this panel is used to set Tasks, Enroute Tasks, Commands and
Options for the group to perform, as well as the starting and ending conditions of the
actions. However, the specific types of actions available for naval groups differs from
aircraft groups.
Tasks
No Task
No action is assigned to the group to perform.
Fire at Point
Fire against a coordinate point on the map as designated by the mission designer. The
ZONE RADIUS value sets the radius of the target area. When firing artillery, the ship will
spread rounds within the entire target area. When firing cruise missiles, the ship will
target the center coordinate of the target area.
185 DCS USER MANUAL