DCS User Manual EN.pdf

ED [DCS USER MANUAL]
Mission Task(s): AFAC.
Remember, because this is an Enroute Task, the AFAC will have to independently detect
the target group prior to being able to issue targeting commands against it. As
described above, target detection will depend on a number of dynamic variables ingame,
including possible terrain obstructions or weather interference. If no group is
designated by the mission designer, the AFAC will not issue any targeting commands.
In the case of an AFAC, the WEAPONS selection refers to weapons the AFAC will request
to be employed against the target.
The Visibility option allows the unit to know or not know the location of target position
at the start of the mission.
Perform Command
The following commands can be set as actions upon reaching a waypoint:
No Action
No command is set. Default selection.
Run Script
169 DCS USER MANUAL