MAP-01-011 HFI Technical Guide - Human Factors Integration ...

Chapter 6 – Crew CharacteristicsTAD DataClassificationsDescription of ClassificationPIAR Label 1PIAR Label 2Objects/data are classified according to the first level ofPIAR data classification:• Motivated• Capable• SufficientObjects/data are classified according to the second level of2SL PIAR data classification:• Cap - Human Factors• Cap - Training and Education Policy• Cap - Competence• Mot - Personal Policy• Suff - Market Factors• Suff - Manning FactorsNote:Cap = CapabilitySuff = SufficientMot = MotivatedHFI Technical IssuesTable 6-2: Key Data Classifications within the RNGTAD6.1.5 Generation of a Project Specific Target Audience Description(PSTAD)The RNGTAD takes the form of a DOORS database and is currently (2006)managed by and available through SSG-CSHF, see previously (Sect 6.1.4.1).For use on a given project, a clone of the master RNGTAD should be obtainedfrom SSG, this clone should then be analysed and converted into a ProjectSpecific Target Audience Description (PSTAD).To create the PSTAD the RNGTAD should be reviewed to identify datacategories that need to be retained; this will largely depend upon on the nature,complexity and specialisation of the RN procurement project to which the TAD isto be applied. HF specialists may be required to support this identification andappraisal of relevant data. In addition, this analysis may result in the exclusion ofcertain data categories where these are not appropriate to the project, oralternatively, the identification of data voids, i.e. the need for further datacategories and/or data refinement.Once completed this becomes the Project Specific Target Audience Description(PSTAD). The PSTAD should continue to be refined, validated and used throughthe remaining Phases of the procurement cycle as defined within the HFIActivities Tables (in Sect 6.3).May 2006 Page 6-11 Issue 4