MAP-01-011 HFI Technical Guide - Human Factors Integration ...

MAP-01-011 – HFI Technical Guide (STGP 11)HFI TechnicalAreaTrainingGeneralArrangementHFI ActivityDEMONSTRATIONHFI OutputFinalise the PSTAD • The outputs are an updatedversion of those used in DraftPSTAD produced duringAssessment.Training activitiesrun acrossAssessment /Demonstration /ManufacturePhasesDevelop HFI DesignRules for GeneralArrangementSee Assessment. 7.3.2• HFI design rules for use indeveloping and evaluating thelayout and related acceptancecriteria.MAP-01-011Ref6.3.3.28.3.3.1Develop HFIPrototyping andDemonstrationRequirementsDevelop DesignRules for InternalCommunicationsHuman factors prototyping anddemonstration requirementsdocument specifying the following:• Identification of critical tasks andassociated design issues for theGeneral Arrangement in priorityorder of significance.• HFI assessment criteria includingthose that will contribute to formalacceptance.• The prototyping anddemonstration requirementsschedule for Design andManufacture stages.Specification of design rules forinternal communications. Thisdocument will include:• The number of broadcast netsrequired and any necessarycommunication pointidentification coding.• The key information flow,communication point locationsand ‘point-to-point’ connectionrequirements for all operationaland non-operationalcompartments and spaces, andfor damage control.• Guidelines for locating andpositioning communicationpoints.• Alarm and main broadcastmicrophone/transmit and speakerpositions including the requiredrange of output power levels.• The locations of telephones.• HFI assessment and acceptancecriteria.8.3.3.28.3.3.3Nov 2006 Page 2-32 Issue 4