PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX
Specs - Home
Specs - Home
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. American Decorative Concrete (800) 592-9320, www.adcsc.com<br />
3. Concrete Polishing Solutions (877) 472-8200, www.go2cps.com<br />
4. Convergent Concrete Technologies (866) 375-2280, www.convergentconcrete.com<br />
5. Eagle Solutions (800) 633-0519, www.eaglefloorsolutions.com<br />
6. HTC (877) 482-8700, www.htc-america.com<br />
7. <strong>No</strong>rton Abrasives (800) 331-3604, www.nortonprocleaning.com<br />
8. Pioneer Eclipse (800) 367-3550, www.pioneer-eclipse.com<br />
9. Pulman-Ermator (800) 232-2635, www.pullman-ermator.com<br />
10. Prosoco (800) 255-4255, www.prosoco.com<br />
11. Quickie Manufacturing Corporation (800) 257-5751, www.quickie.com<br />
12. Rubbermaid Commercial Products (800) 347-9800, www.rcpworksmarter.com<br />
13. SASE Company, Inc. (800) 522-2606, www.sasecompany.com<br />
14. Seal Source (800) 305-9144, www.sealsource.com<br />
15. VMC Technical Assistance Corp (800) 460-4862, www.vmctac.com<br />
B. Substitutions: <strong>No</strong>t permitted unless otherwise specified.<br />
2.2 GRINDING/POLISHING EQUIPMENT<br />
A. Provide three-phase, 480 volt electrical supply within 200 feet of work area.<br />
1. If generators are required due to site conditions, provide security at cable access points.<br />
B. Dust extraction system and pre-separator for grinding and polishing.<br />
1. Heavy-duty industrial HEPA filtration vacuum system, suitable for extracting and containing large<br />
quantities of fine concrete dust (minimum 350CFM air flow) in conjunction with manufacturer<br />
recommended pre-separator.<br />
2. Provide one of the following:<br />
a. 86D, by HTC.<br />
b. T8600, by Pullman-Ermator.<br />
c. Bull 1250, by SASE Company, Inc.<br />
d. Approved equal.<br />
C. Furnish three grinding/polishing machines in full operating condition during duration of work.<br />
1. Planetary, counter-rotating 3- or 4-head variable speed floor grinder.<br />
2. Minimum 600 pounds down force.<br />
D. Hand grinder with dust extraction or dust suppression attachment for edge grinding/polishing.<br />
2.3 GRINDING/POLISHING HEADS AND PADS<br />
A. Metal Bonded Diamond Grinding Heads:<br />
1. Use grinding heads from specified manufacturers only.<br />
2. 60, 80 and 150 grit.<br />
B. Edge Grinding Pads:<br />
1. 60, 80, and 150 grit.<br />
2.4 HIGH SPEED BURNISHING EQUIPMENT<br />
A. Equipment shall meet the specified minimum performance requirements.<br />
1. Provide equipment as manufactured by one of the following:<br />
a. Eagle Solutions.<br />
b. Minuteman.<br />
c. Pioneer Eclipse.<br />
03367-5<br />
<strong>Walmart</strong> #<strong>1186</strong> – <strong>Liberty</strong>, <strong>TX</strong> 04/2<br />
CMA/10118.034
Change language