PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

E. Secure products in-place with positive anchorage devices designed and sized to withstand stresses, vibration, physical
distortion, or disfigurement.
1.5 PRE-CONSTRUCTION MEETING:
A. Contractor shall schedule a pre-construction meeting in advance of Work defining the construction of the neutralization
wall. Contractor, Air Curtain Manufacturer's Representative (Section 15700), and primary subcontractors
shall attend meeting.
1. Notify the Wal-Mart Construction Manager 7 days in advance of scheduled meeting date.
B. Contractor shall be responsible for preparing and distributing a meeting agenda at least two 2 days before the
scheduled meeting. The agenda shall, as a minimum, address the following issues.
1. Discuss the purpose of the neutralization construction as defined herein. Review in detail the scope of
Work relating to construction of wall.
2. Coordination of construction efforts between trades in building the perimeter walls of neutralization area.
3. Responsibilities for sealing penetrations of neutralization wall.
4. Determination of acceptable neutralization wall construction.
5. Review details and specifications regarding Air Curtain construction and equipment and submit
information.
C. Contractor shall record the proceeding of the meeting and prepare minutes reflecting the conversations and discussions.
Copy each attendee in addition to the Wal-Mart Construction Manager.
PART 2 - PRODUCTS
Not Used.
PART 3 - EXECUTION
3.1 CONTRACTOR FIELD INSPECTION AND TESTING
A. Inspect Work provided under this Contract to ensure Work is in compliance with Contract requirements.
B. Examination Of Work: Performed prior to beginning Work and prior to beginning each segment of Work and includes:
1. Review of Contract requirements.
2. Review of shop drawings and other submittal data after return and approval.
3. Examination to assure materials and equipment conform to Contract requirements.
4. Examination to assure required preliminary or preparatory Work is complete.
C. Initial Inspection: Performed when representative portion of each segment of Work is completed and includes:
1. Performance of required tests.
2. Quality of workmanship.
3. Review for omissions or dimensional errors.
4. Examination of products used, connections and supports.
5. Approval or rejection of inspected segment of Work.
D. Follow-Up Inspections: Performed daily and more frequently as necessary to assure noncomplying Work has been
corrected.
E. No components of the neutralization wall shall be covered or concealed within construction before Work is examined
and found acceptable with respect to neutralization wall construction.
END OF SECTION
01459-2
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034