PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

3. Notify Walmart Concrete Consultant minimum 14 days prior to date and time when mockup will be performed
and completed.
4. Choose mockup location that demonstrates proposed range of aesthetic effects and workmanship.
5. Obtain Wal-Mart Construction Manager’s approval of mockups before proceeding with work.
6. Maintain mockups during construction in undisturbed condition as a standard for judging completed work.
7. Approved mockups installed in sales areas may become part of the completed work if acceptable to Wal-
Mart Construction Manager.
E. Mandatory Pre-Installation Meeting:
1. Plan, host, and attend a pre-installation meeting to be conducted at site by Wal-Mart Consultant via teleconference.
2. Schedule pre-installation meeting with Walmart Concrete Consultant a minimum of14 days prior to first
night of burnishing and after all submittals required herein have been submitted and approved by Walmart
Concrete Consultant or Architect of Record.
3. Obtain pre-installation meeting agenda template from Walmart Concrete Consultant.
4. Require responsible representatives of each party involved with the surface enhancement work to attend the
pre-installation meeting. Representatives to be present shall include personnel who are directly involved in
overseeing the work and who have authority to control the polishing work.
5. Notify all required attendees in writing of scheduled time and place a minimum of 14 days in advance of
pre-installation meeting. Include copy of agenda with invitation.
6. The pre-installation meeting shall convene only when all parties are present.
7. Minutes of the pre-installation meeting shall be recorded, typed, printed, and distributed to all parties concerned
by the General Contractor within 5 days of the meeting. One copy of the minutes shall also be
transmitted to the Owner's representative for information purposes.
8. Attendees shall include, but not be limited to the following:
a. Wal-Mart Construction Manager
b. Wal-Mart Field Project Manager
c. Walmart Store/Club Manager
d. Wal-Mart Consultant
e. General Contractor
f. Project manager
g. Superintendents
h. Densifier manufacturer’s representative
i. Densifier applicator and burnished floor surface installer.
j. Joint Filler Applicator, if applicable
k. Joint Filler Manufacturer, if applicable
9. Changes to the contract documents from recommendations or discussions at the Pre-Installation meeting
shall be approved in writing by the Wal-Mart Construction Manager prior to implementation. Walmart
Concrete Consultant is NOT authorized to change any specified requirement or to approve execution of any
portion of the work.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Subject to compliance with project requirements, provide equipment and products as manufactured by the following
to the extent as specified hereinafter:
1. 3M (888) 364-3577 http://www.3m.com/
2. Advanced Blending (817) 477-8022 http://www.advancedblending.com/
3. Brulin & Company (800) 776-7941 http://www.brulin.com
4. Concrete Polishing Solutions (877) 472-8200 http://www.go2cps.com/
5. Convergent Concrete Technologies (866) 375-2280 http://www.convergentconcrete.com/
6. Eagle Solutions (800) 633-0519 http://www.eaglefloorsolutions.com/
7. ETC of Henderson, Inc. (800) 334-6651 http://www.etcpads.com/
03931-3
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034