06.09.2015 Views

PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

Specs - Home

Specs - Home

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

C. As-built Record Documents and Shop Drawings: Record as-builts shall be maintained and submitted for the<br />

primary purpose of recording the locations for concealed interior and exterior underground utilities as specified in<br />

the individual specifications. Legibly record actual measured horizontal and vertical locations of interior and<br />

exterior underground utilities and appurtenances, referenced to permanent surface improvements.<br />

D. Record required as-built information concurrent with construction progress. Do not permanently conceal work<br />

until required information has been recorded.<br />

E. At Project completion, the Contractor shall place the Record Documents (including Building and Civil Record<br />

Drawings, <strong>Specifications</strong>, Addenda, and Change Orders) enclosed in a plastic pipe tube (fixed cap at one end and a<br />

threaded-cap on the other end) for storage in the Electrical Room unless otherwise specified to be located in<br />

another location in the individual Sections. Placement shall be in the presence of and witnessed by the <strong>Store</strong><br />

Manager.<br />

1.8 OPERATION AND MAINTENANCE DATA<br />

A. Operation and Maintenance data shall include a suitably bound set of descriptive literature, maintenance and<br />

operation data, and parts lists for each item of equipment provided under this Contract that will require<br />

maintenance or special operation procedures, including drawings, instructions, or manuals supplied with equipment<br />

furnished by others and installed under this Contract. Submittal of O&M data shall be in the form of placement by<br />

the Contractor of the bound set of O&M data in the Electrical Distribution Center (EDC) within the building. Do<br />

not include O&M data in the Closeout Document Book or submit to Wal-Mart Contract Administration.<br />

Placement of documents shall be witnessed by the <strong>Store</strong> Manager and shall be at least 14 days prior to final<br />

inspection.<br />

1.9 WARRANTIES AND BONDS<br />

A. Prior to Final Application for Payment, submit required warranties and bonds in Closeout Document Book.<br />

1. Assemble documents from Subcontractors, suppliers, and manufacturers.<br />

2. For equipment put into use with Owner's acceptance during construction, submit within ten days after first<br />

operation, listing date of acceptance as start of warranty period.<br />

3. For items of Work delayed materially beyond Date of Substantial Completion, provide updated submittal<br />

within ten days after acceptance, listing date of acceptance as start of warranty period.<br />

END OF SECTION<br />

WAL-MART STORES, INC.<br />

MAINTENANCE DATA SHEET<br />

Complete all Sections Prior To Final Payment<br />

Location:<br />

Size:<br />

<strong>Store</strong>/Club <strong>No</strong>.:<br />

Possession Date:<br />

TYPE OF BUILDING CONSTRUCTION<br />

Walls:<br />

Roof (circle one): SBS BUR EPDM Metal Other (explain)<br />

Roofing Mfg.<br />

Warranty Information. (years)<br />

01770-4<br />

<strong>Walmart</strong> #<strong>1186</strong> – <strong>Liberty</strong>, <strong>TX</strong> 04/20/11<br />

CMA/10118.034

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!