PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

. Exposed overhead structure to remain in place (including, but not limited to, structural steel, steel
joists, metal deck, and bracing members) and suspended items (including, but not limited to, drop
boxes, ductwork and light fixtures):
1) Cover entirely with drop cloths, all merchandise, furniture, equipment, and floors in areas to
be cleaned.
2) Dust or vacuum to remove loose dirt and dust.
D. Coordination and Scheduling: Perform cleaning during periods when store is closed or during low traffic periods,
typically between 10:00 PM and 6:00 AM. Coordinate cleaning schedule with store manager. Submit to the store
manager, a mutually agreed upon cleaning schedule at least 7 days prior to commencement of cleaning operations.
E. Cleaning shall be completed within 45 days of possession of area cleaned. Schedule with Wal-Mart Construction
Manager.
F. Dispose of ceiling tile which cannot be cleaned and must be replaced as specified in section 02023.
3.3 TRASH REMOVAL
A. On a daily basis, clean work areas and access, and dispose of waste materials, rubbish and debris.
B. Disposal of non-hazardous demolished materials shall be by Owner's Waste Management Vendor as specified in
Section 01742 and in accordance with agreement between Waste Management Vendor and Contractor.
C. Deposit waste materials, rubbish, and debris in waste containers as provided by the Waste Management Vendor as
specified in Section 01742. Perform segregation of waste materials into the various classification and segregated
materials as established and agreed to between Waste Vendor and Contractor.
D. Do not allow waste materials, rubbish and debris to accumulate and become an unsightly or hazardous condition.
E. Notify the Owner’s Waste Management Vendor when containers are ready for pickup and disposal.
F. Keep streets and access to site free of rubbish and debris.
3.4 FINAL CLEANING:
A. Execute final cleaning prior to final inspection as follows.
1. Clean Project site, yard, and grounds, in areas disturbed by construction activities, including landscape development
areas, of rubbish, waste material, litter, and other foreign substances.
2. Sweep paved areas broom clean. Remove petrochemical spills, stains, and other foreign deposits.
3. Rake grounds that are neither planted nor paved to a smooth, even-textured surface.
4. Remove tools, construction equipment, machinery, and surplus material from Project site.
5. Clean exposed exterior and interior hard-surfaced finishes to a dirt-free condition, free of stains, films, and
similar foreign substances. Avoid disturbing natural weathering of exterior surfaces. Restore reflective
surfaces to their original condition.
6. Remove debris and surface dust from limited access spaces, including roofs, plenums, shafts, trenches,
equipment vaults, manholes, attics, and similar spaces.
7. Clean debris from roofs, gutters, downspouts, and drainage systems.
8. Vacuum carpet and similar soft surfaces, removing debris and excess nap; shampoo if visible soil or stains
remain.
9. Vacuum clean all interior floor surfaces.
10. Clean transparent materials, including mirrors and glass in doors and windows. Remove glazing compounds
and other noticeable, vision-obscuring materials. Replace chipped or broken glass and other damaged
transparent materials. Polish mirrors and glass, taking care not to scratch surfaces.
11. Remove labels that are not permanent.
01740-3
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034