06.09.2015 Views

PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

Specs - Home

Specs - Home

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

D. As equipment is received, Refrigeration Contractor shall verify Wal-Mart Purchase Order Receipts and forward to<br />

the Contractor for Wal-Mart processing.<br />

E. Contractor shall notify Wal-Mart of equipment received from carrier in damaged condition and shortages.<br />

Damages will be noted on bill of lading. Contractor shall be responsible for failure to note freight damage and<br />

shortages at time of receipt of equipment.<br />

1.17 SPECIFICATIONS FOR REFRIGERATION INSTALLATION<br />

A. Contractor Responsibilities:<br />

1. Coordinate release of Owner and Wal-Mart furnished equipment with Wal-Mart Mechanical Services<br />

Department. The Wal-Mart Mechanical Services Construction Manager is the sole person who can change<br />

delivery dates.<br />

2. Provide crane service to hoist refrigeration equipment directly from truck to mounting position.<br />

3. Provide structural support for refrigeration equipment.<br />

4. Provide opening through outside building wall and provide weather hood.<br />

B. Refrigeration Contractor Responsibilities:<br />

1. Tubing, fittings, insulation for refrigerant lines, unistrut, fasteners, bolts, hangers, etc.<br />

2. Install all refrigeration equipment scheduled or shown on Drawings and described in this Section.<br />

3. Provide labor to unload and set refrigeration equipment scheduled or shown on Drawings and described in<br />

this Section.<br />

4. Make final electrical connections to Owner and Wal-Mart furnished equipment.<br />

5. Provide associated electrical wiring except terminations and slave wires.<br />

6. Install Owner furnished refrigeration controls and sensors.<br />

7. Provide attachment of refrigeration equipment.<br />

1.18 DRAWINGS<br />

A. Provide as built piping drawings, after job completion, in 18- by 24-inch glass frame. Install on compressor room<br />

interior.<br />

1.19 REQUEST FOR INFORMATION SUBMITTAL<br />

A. All Request for Information (RFIs) regarding Refrigeration shall follow the attached copy of the Request for<br />

Information Process Flow Chart.<br />

B. Refer to Specification Section 01255 for RFI Information Submittal Process.<br />

PART 2 PRODUCTS<br />

2.1 OWNER FURNISHED PRODUCTS<br />

A. Refrigerated Cases and Refrigeration Equipment Furnished by Wal-Mart for Installation by Contractor:<br />

Refrigerated cases and refrigeration equipment scheduled or shown on Drawings and described in this Section will<br />

be furnished by Wal-Mart for installation by Refrigeration Contractor.<br />

B. Work Furnished and Installed Under Separate Contracts (NIC):<br />

1. Wal-Mart’s Freezer/Cooler Supplier will perform the following:<br />

a. Delivery and handling of freezer/cooler panels and associated doors and equipment as specified<br />

above.<br />

b. Unloading, uncrating, setting and assembly of walk-in coolers and freezers, and associated doors and<br />

equipment .<br />

15600-5<br />

<strong>Walmart</strong> #<strong>1186</strong> - <strong>Liberty</strong>, <strong>TX</strong> 04/20/11<br />

CMA/10118.034

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!