PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

K. Re-Use: The use, in the same or similar form as it was produced, of a material which might otherwise be
discarded.
L. Solid Waste: Putrescible and nonputrescible solid, semisolid, and liquid wastes, including garbage, trash, refuse,
paper, rubbish, ashes, industrial wastes, demolition and construction wastes, abandoned vehicles and parts thereof,
discarded home and industrial appliances, dewatered, treated, or chemically fixed sewage sludge which is not
hazardous waste, manure, vegetable or animal solid and semisolid wastes, and other discarded solid and semisolid
wastes. “Solid Waste” does not include hazardous waste, radioactive waste, or medical waste as defined or
regulated by State law.
M. Source-Separated: Materials, including comingled recyclables, that have been separated or kept separate from the
solid waste stream at the point of generation, for the purpose of additional sorting or processing of those materials
for reuse or recycling in order to return them to the economic mainstream in the form of raw materials for new,
reused, or reconstituted products which meet the quality standards necessary to be used in marketplace.
N. Waste Hauler: A company that possesses a valid permit from the local waste management authority to collect and
transport solid wastes from individual or businesses for the purpose of recycling or disposal.
O. Construction Waste Management Plan (CWMP): The Construction Waste Management Plan identifies the
construction waste diversion expectations including diversion percentages and tons of the targeted materials and
the locations for the legal reuse, recycling, or disposal.
P. C&D Waste and Recycle Program Manager: The individual on site charged with managing the C&D Waste and
Recycle Program for the Contractor. This person does not have to be an employee of the Contractor, but must operate
under the guidance and direction of the Contractor and execute the CWMP.
Q. C&D Training Manual: A site specific training manual that explains the processes and procedures for handling the
C&D Waste and Recycle needs. Contents shall include but are not limited to the following:
1. Materials to be recycled.
2. Materials to be re-used.
3. Materials to be salvaged.
4. CWMP
1.3 PERFORMANCE GOAL
A. The waste management objective is to recycle, reuse, or salvage non-hazardous waste generated by the Work and
to eliminate or minimize the amount of waste going to landfills.
B. The Waste Management Plan does not relieve the Contractor of responsibility for adequate and continuing control
of pollutants and other environmental protection measures, including, but not limited to requirements in Section
01500 or 02370, if specified.
1.4 SELECTION AND PAYMENT
A. Employment and payment for services of a Construction and Demolition Waste Management Vendor (Vendor) for
the collection and disposal of designated construction and demolition waste will be by Wal-Mart.
1. Wal-Mart Vendor: Oakleaf Waste Management, LLC (866) 338-2342 or onsite@oakleafwaste.com.
1.5 RESPONSIBILITIES
A. Wal-Mart Responsibility:
1. Obtain the services of a pre-negotiated Vendor for the collection and disposal of designated construction
and demolition waste.
B. Basic Vendor Responsibility:
01742-2
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034