PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

UniSpec II- Store Planning 032610
REVISION NOTES:
Rev 1: (10/01/05) Minor corrections to text.
Rev 2: (06/05/06) Revised concrete mix for exterior slabs to include 25% fly ash for all protos. Added Davis Colors (Liquid Coloring Agent) (CI 6772).
Rev 3: (08/04/06) Revised list of concrete form release agents per CI 6978.
Rev 4: (09/29/06) Added editor's note pertaining to the use of this section for Store Planning work versus the use of section 03300.
Rev 5: (03/14/07) Added Greenstreak plate dowels and plate dowel basket as approved products for Sam's Remodel CI 07-09.
Rev 6: (06/29/07) Added PNA HydraCure as approved sheet curing product. (New Store CI 7559)
Rev 7: (02/29/08) Added AquaCure by DRC curing blanket and deleted HydraCure by PNA (new store CI 7943).
Rev 8: (01/30/09) SPCI S-5191 (Miscellaneous revisions and corrections per new store specifications. All exterior slab requirements moved to section
03310 to correspond to New Stores formatting. Incorporated requirements for Sam’s Club full and partial panel replacements. Revised curing compound to
temporary film-forming.)
Rev 9: (02/20/09 Mid-Cycle) Minor revisions per 013009 new stores spec and SSI recommendations. Removed ICC coloring information for SC and
WNM (further updates pending).
Rev 10: (03/27/09) SPCI W-5477/S-5215 (Deleted Energy Mgmt and Refrigeration from list of Separate Contractor coordination requirements in 1.9B.)
Clarification – Removed para 1.8 (information listed in 3.20).
Rev 11: (03/27/09a) SPCI W-5486 (Added model number for prefabricated pit access form in 2.3C.)
Rev 12: (05/29/09) SPCI W-5318 (Added integral coloring information.) Added Dayton Superior curing compound and revised procedures for curing
compound application per Walmart Concrete Consultant. Deleted Permagile (out of business).
Rev 13: (09/25/09) Clarification – added editor’s note for use of pre-fabricated pit form in SC, WNM only.
Rev 14: (10/30/09) Revised vapor retarder products (Stego Wrap) and references.
Rev 15: (01/29/10) Removed fly ash and slag. Reduced slump to 5” and modified slab protection timeline. (CI W-1217, S-1218)
Rev 16: (03/26/10) Revised reference to General Conditions in 1.8 for coordination with new Wal-Mart General Conditions dated 07/17/09.
SECTION 03312 - CAST-IN-PLACE CONCRETE SLABS (INTERIOR)
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Cast-in-place concrete slabs including slabs on grade for the following:
a. Interior floor slabs.
2. Aggregate base below slab.
3. Reinforcement and accessories.
4. Integral colored concrete.
B. Related Sections:
1. Section 01458 - Testing Laboratory Services. Procedures for inspection, testing, and documentation by
Owner furnished testing laboratory.
2. Section 05500 - Metal Fabrications: Metal components cast into concrete.
3. Section 07900 - Joint Sealers: Joint fillers and sealants for floor slabs.
4. Section 09650 - Resilient Flooring: Joint filler for contraction and construction joints concealed by floor
finish material.
1.2 REFERENCES
A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced
within the text by the basic designation only.
B. American Association of State Highway and Transportation Officials (AASHTO):
1. Standard Specification For Transportation Materials And Methods Of Sampling and Testing:
a. AASHTO T318 - Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
(Formerly AASHTO TP 23)
b. AASHTO M147 – Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses
C. American Concrete Institute (ACI):
1. ACI 117 - Standard Tolerances for Concrete Construction and Materials.
03312-1
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034