PROJECT MANUAL Specifications Seafood Removal Walmart Store No 1186 Liberty TX

A. Plastic:
1. Clear Plastic:
a. Space (CG-2145) Corner Guard, clear, 1/8-inch thick, 2-1/2 x 2-1/2 inches x 48 inches, by American
Floor.
b. Clear Polycarbonate Corner Guards (CGT-18), 2-1/2 inches x 2-1/2 inches x 48 inches, by Pawling.
2. Rigid Plastic
a. Rigid Plastic Corner Guard, 1/2-inch thick, 3 x 3 inches x 32 inches, color black, by Parkland Plastics.
b. Fasteners: Black flathead countersunk screws, length sufficient to penetrate substrate.
B. Aluminum:
1. Polaris (CG-2139) 90° Corner Guard, 18 gage, 2 x 2 inches x 48 inches, unless otherwise shown, by American
Floor.
2. Aluminum Corner Guard, 0.08 inch thick, 2 x 2 inches x 48 inches, unless otherwise shown, by Pawling.
a. CG-401, for 90° corners.
b. CG-404, for 135° corners.
3. Factory pre-drilled for installation with countersunk screws.
C. Stainless Steel: 16 gage, 1-1/2 x 1-1/2 inches, unless otherwise shown.
1. ECK-K, by Schluter.
2. Lunar CG-2143, Style L-1, by American Floor.
3. CG-51, by Pawling.
4. S181124C-304, by InPro.
5. Adhesive (unless otherwise shown to install with stainless steel screws):
a. KURDI-fix, by Schluter.
b. ADH-50 Adhesive, by Pawling.
c. Equivalent by other manufacturer or as recommended by corner guard manufacturer.
2.3 WALL GUARDS
A. Plastic Wall Guards - also noted on drawings as 'WG' or 'bumper rail' - (Except Pharmacy): PVC bumper on PVC
mounting base, 2" high x 12 ft long x 1-3/4" projection, color black. Provide the following:
1. CartGuard E (CGT-175) bumper with base (CGB-175), including corners and end caps as required, by
McCue Corporation.
B. Pharmacy Wall Guards: Vinyl bumper on continuous aluminum retainer, 3” high x 12 ft long section x 1” projection,
lightly pebbled or matte finish. Provide one of the following:
1. WG-3 Wall Guard, by Pawling.
a. Gray: No 210 Silver Gray.
2. 500 Wall Guard by IPC.
a. Gray: No. 0105 Silver.
C. Accessories: End caps, outside corners, brackets, and fasteners, as recommended by wall guard manufacturer.
2.4 REFRIGERATED CASE PROTECTION (WAL-MART FURNISHED/CONTRACTOR INSTALLED)
A. Case Corner Protection: Impact resistant polyethylene, with stainless steel legs and strike plate.
1. CartStop CG, 33” high, unless shown otherwise, by McCue.
a. Color: 401 Black.
b. Corner guards will be furnished with metal flanges and plastic anchors.
B. Refrigerated Case Floor Mounted Railing:
1. CartStop RE2, with CSR 4x4A corner assemblies, by McCue.
a. Color: 401 Black.
b. Railings and corner assemblies will be furnished with metal flanges and plastic anchors.
10260-2
Walmart #1186 – Liberty, TX 04/20/11
CMA/10118.034