BAKER HUGHES - Drilling Fluids Reference Manual

Baker Hughes Drilling Fluids
SYN-TEQ fluid formulation tables
Table 5-35 Products Required to Build 100 bbl of SYN-TEQ Fluid: 70/30 and 80/20
Synthetic/Water Ratios (SWR)
Maximum Temperature ºF (ºC)
Products Prod 250 (121) 300 (149) 350 (177) 400 (204) 450 (232)
OMNI-TEC TM , gal
OMNI-MUL TM , gal
OMNI-TROL TM , 50 lb sacks
MIL-LIME TM , 50 lb sacks
110
25
10
9
130
50
15
11
170
62.5
20
14
70/30 SWR
ISO-TEQ,
Brine,* CARBO-GEL,
(bbl)
(bbl)
(50 lb sacks)
8.0 66 30 4 0
8.5 65 30 4 27
9.0 64 29 5 55
9.5 63 29 5 82
10.0 61 28 5 109
Fluid Weight,
(lb m /gal)
170
75
30
14
190
125
30
16
MIL-BAR,
(100 lb sacks)
10.5 60 27 5 136
11.0 59 27 5 164
11.5 58 26 5 191
12.0 56 26 5 218
12.5 55 25 5 245
13.0 54 25 5 272
13.5 52 24 5 299
14.0 51 24 5 327
14.5 50 23 5 354
15.0 48 23 5 381
80/20 SWR
16.0 53 14 5 445
16.5 51 14 5 471
17.0 50 14 5 499
17.5 48 13 5 525
18.0 47 13 5 552
18.5 45 12 4 579
19.0 44 12 4 606
19.5 42 12 3 633
20.0 41 11 3 659
*Saturated NaCl or 250,000 ppm CaCl 2 water
The volumes and densities are accurate to ±1%. Because it is not possible for a able to show formulations with numerous
internal phase salinities and temperature stabilities, it is recommended that a material balance approach be utilized prior
to the formulation of large quantities of CARBO-DRILL.
Baker Hughes Drilling Fluids
Reference Manual
Revised 2006 5-59