BAKER HUGHES - Drilling Fluids Reference Manual

More documents

Recommendations

Info

FLUIDS ENVIRONMENTAL SERVICES Discharge – 2” Alternative Fluid Ends available Control Panel Engraved stainless steel control panel giving central control and visual display of rates, pressures etc. Safety Built to the new ATEX directive (equipment and protection systems intended for use in potentially explosive atmospheres). Emergency stop, fuel stop, fail safe system. Platform control shut downs available pneumatic or electric. Designed and manufactured in accordance with the current DCR regulations. Certification Certified to allow the duty holder to demonstrate compliance with the requirements of SI 913. Dimensions En gine Skid 4571mm (L) X 2438mm (D) X 2820mm (H) Pump Skid 2438mm (L) X 2438mm (D) X 2820mm (H) Combined 7009mm (L) X 2438mm (D) X 2820mm (H) Weight Data Engine Skid Gross Weight: 14,000 kg Pump Skid Gross Weight: 8,000 kg ELECTRICALLY DRIVEN INJECTION PUMP Description Zone 1, High pressure pumping unit with variable speed inverter drive. BAKER HUGHES DRILLING FLUIDS REFERENCE MANUAL REVISION 2006 14-46
FLUIDS ENVIRONMENTAL SERVICES Environmental Acoustically clad to reduce noise levels to 78dbA. Zero atmospheric emissions. Triplex pump Maximum pumping rate 3.15 bbl/min at 2500psi. Maximum pressure 5000psi at 26 gpm Controls Remote control from operator station with local maintenance control panel. Safety Built to the new ATEX directive, can be tied in with platform shut down controls. Dimensions Length Width Height 3600mm 2062mm 2220mm Weight Total Gross Weight: 8,000 kg Includes • Safe area variable speed inverter drive. (Zone 1 enclosure available as option). • Zone 1 operator’s panel. • Noise hood. BAKER HUGHES DRILLING FLUIDS REFERENCE MANUAL REVISION 2006 14-47
Page 2 and 3:
Drilling Fluids Reference Manual Ch
Page 4 and 5:
Chapter 1 Table of Contents Fundame
Page 6 and 7:
Baker Hughes Drilling Fluids Return
Page 8 and 9:
Fundamentals of Drilling Fluids Cha
Page 10 and 11:
Baker Hughes Drilling Fluids Contro
Page 12 and 13:
Baker Hughes Drilling Fluids Physic
Page 14 and 15:
Baker Hughes Drilling Fluids Newton
Page 16 and 17:
Baker Hughes Drilling Fluids Figure
Page 18 and 19:
Baker Hughes Drilling Fluids Contin
Page 20 and 21:
Baker Hughes Drilling Fluids The fl
Page 22 and 23:
Baker Hughes Drilling Fluids As def
Page 24 and 25:
Page 26 and 27:
Baker Hughes Drilling Fluids Table
Page 28 and 29:
Baker Hughes Drilling Fluids Gel St
Page 30 and 31:
Baker Hughes Drilling Fluids drilli
Page 32 and 33:
Baker Hughes Drilling Fluids Time T
Page 34 and 35:
Baker Hughes Drilling Fluids Then,
Page 36 and 37:
Baker Hughes Drilling Fluids Low-Gr
Page 38 and 39:
Baker Hughes Drilling Fluids The pH
Page 40 and 41:
Baker Hughes Drilling Fluids Exampl
Page 42 and 43:
Baker Hughes Drilling Fluids Using
Page 44 and 45:
Baker Hughes Drilling Fluids Drill-
Page 46 and 47:
Baker Hughes Drilling Fluids MBT (M
Page 48 and 49:
Baker Hughes Drilling Fluids At dif
Page 50 and 51:
Page 52 and 53:
Baker Hughes Drilling Fluids Primar
Page 54 and 55:
Baker Hughes Drilling Fluids Nomenc
Page 56 and 57:
Formation Mechanics Chapter Two For
Page 58 and 59:
Table of Contents List of Figures F
Page 60 and 61:
Formation Mechanics • 3 million g
Page 62 and 63:
Formation Mechanics Hydration Mecha
Page 64 and 65:
Formation Mechanics Attapulgite Fig
Page 66 and 67:
Formation Mechanics in the outer si
Page 68 and 69:
Formation Mechanics • Calcareous
Page 70 and 71:
Formation Mechanics called “bio
Page 72 and 73:
Formation Mechanics Reservoir Press
Page 74 and 75:
Formation Mechanics Selecting the p
Page 76 and 77:
Formation Mechanics Figure 2-12 Pho
Page 78 and 79:
Water-Based Drilling Fluids Chapter
Page 80 and 81:
Figure 3-7 The Sodium Chloride Stru
Page 82 and 83:
Water-base Drilling Fluids Chapter
Page 84 and 85:
Baker Hughes Drilling Fluids Atomic
Page 86 and 87:
Baker Hughes Drilling Fluids Isotop
Page 88 and 89:
Baker Hughes Drilling Fluids Atoms
Page 90 and 91:
Page 92 and 93:
Baker Hughes Drilling Fluids Proper
Page 94 and 95:
Page 96 and 97:
Baker Hughes Drilling Fluids Solubi
Page 98 and 99:
Baker Hughes Drilling Fluids wettin
Page 100 and 101:
Baker Hughes Drilling Fluids The re
Page 102 and 103:
Baker Hughes Drilling Fluids Chemic
Page 104 and 105:
Baker Hughes Drilling Fluids attrac
Page 106 and 107:
Baker Hughes Drilling Fluids For a
Page 108 and 109:
Baker Hughes Drilling Fluids Gradua
Page 110 and 111:
Baker Hughes Drilling Fluids Theref
Page 112 and 113:
Baker Hughes Drilling Fluids Conven
Page 114 and 115:
Page 116 and 117:
Baker Hughes Drilling Fluids With g
Page 118 and 119:
Baker Hughes Drilling Fluids above
Page 120 and 121:
Baker Hughes Drilling Fluids revers
Page 122 and 123:
Baker Hughes Drilling Fluids of add
Page 124 and 125:
Baker Hughes Drilling Fluids of ava
Page 126 and 127:
Page 128 and 129:
Baker Hughes Drilling Fluids Mist D
Page 130 and 131:
Baker Hughes Drilling Fluids potass
Page 132 and 133:
Baker Hughes Drilling Fluids Comple
Page 134 and 135:
Baker Hughes Drilling Fluids 6. Fil
Page 136 and 137:
Baker Hughes Drilling Fluids Defloc
Page 138 and 139:
Baker Hughes Drilling Fluids Calciu
Page 140 and 141:
Baker Hughes Drilling Fluids levels
Page 142 and 143:
Baker Hughes Drilling Fluids Filtra
Page 144 and 145:
Baker Hughes Drilling Fluids weight
Page 146 and 147:
Baker Hughes Drilling Fluids Standa
Page 148 and 149:
Baker Hughes Drilling Fluids GLYCOL
Page 150 and 151:
Page 152 and 153:
Baker Hughes Drilling Fluids Salt C
Page 154 and 155:
Baker Hughes Drilling Fluids pressu
Page 156 and 157:
Page 158 and 159:
Baker Hughes Drilling Fluids Filter
Page 160 and 161:
Baker Hughes Drilling Fluids System
Page 162 and 163:
Baker Hughes Drilling Fluids • Pr
Page 164 and 165:
Baker Hughes Drilling Fluids AQUA-D
Page 166 and 167:
Page 168 and 169:
Baker Hughes Drilling Fluids . Tabl
Page 170 and 171:
Baker Hughes Drilling Fluids Seawat
Page 172 and 173:
Baker Hughes Drilling Fluids 6. Pou
Page 174 and 175:
Baker Hughes Drilling Fluids 5. Rin
Page 176 and 177:
Baker Hughes Drilling Fluids PERFOR
Page 178 and 179:
Baker Hughes Drilling Fluids • Th
Page 180 and 181:
Baker Hughes Drilling Fluids densit
Page 182 and 183:
Baker Hughes Drilling Fluids Equipm
Page 184 and 185:
Baker Hughes Drilling Fluids 3. Wit
Page 186 and 187:
Baker Hughes Drilling Fluids Refere
Page 188 and 189:
Chapter Four Contamination of Water
Page 190 and 191:
Contamination of Water-Base Muds Ch
Page 192 and 193:
Baker Hughes Drilling Fluids saltwa
Page 194 and 195:
Baker Hughes Drilling Fluids Oven t
Page 196 and 197:
Baker Hughes Drilling Fluids Carbon
Page 198 and 199:
Page 200 and 201:
Baker Hughes Drilling Fluids The te
Page 202 and 203:
Baker Hughes Drilling Fluids treatm
Page 204 and 205:
Baker Hughes Drilling Fluids when a
Page 206 and 207:
Chapter 5 Table of Contents Oil / S
Page 208 and 209:
Baker Hughes Drilling Fluids Solids
Page 210 and 211:
Page 212 and 213:
Oil / Synthetic Fluids 3. Lubricity
Page 214 and 215:
Oil / Synthetic Fluids returns may
Page 216 and 217:
Oil / Synthetic Fluids the area of
Page 218 and 219:
Oil / Synthetic Fluids charged (rep
Page 220 and 221:
Oil / Synthetic Fluids Ions surroun
Page 222 and 223:
Oil / Synthetic Fluids Surface ener
Page 224 and 225:
Oil / Synthetic Fluids to form oil
Page 226 and 227:
Oil / Synthetic Fluids As indicated
Page 228 and 229:
Oil / Synthetic Fluids Oil Density
Page 230 and 231:
Oil / Synthetic Fluids As the conce
Page 232 and 233:
Oil / Synthetic Fluids lower pH. Th
Page 234 and 235:
Oil / Synthetic Fluids One of the m
Page 236 and 237:
Oil / Synthetic Fluids Amine Lignit
Page 238 and 239:
Oil / Synthetic Fluids The MAGMA-TE
Page 240 and 241:
Oil / Synthetic Fluids System Maint
Page 242 and 243:
Oil / Synthetic Fluids CARBO-MUL ®
Page 244 and 245:
Oil / Synthetic Fluids CARBO-TEC ®
Page 246 and 247:
Oil / Synthetic Fluids CARBO-VIS C
Page 248 and 249:
Oil / Synthetic Fluids MAGMA-TROL
Page 250 and 251:
Oil / Synthetic Fluids OMNI-MUL ®
Page 252 and 253:
Oil / Synthetic Fluids OMNI-TROL /
Page 254 and 255:
Oil / Synthetic Fluids 8. Do not us
Page 256 and 257:
Oil / Synthetic Fluids Solids contr
Page 258 and 259:
Oil / Synthetic Fluids Figure 5-22
Page 260 and 261:
Oil / Synthetic Fluids Salts Since
Page 262 and 263:
Oil / Synthetic Fluids Table 5-28 C
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Oil / Synthetic Fluids Table 5-34 F
Page 270 and 271:
Oil / Synthetic Fluids Table 5-36 P
Page 272 and 273:
Oil / Synthetic Fluids Table 5-38 F
Page 274 and 275:
Oil / Synthetic Fluids Metric Conve
Page 276 and 277:
Oil / Synthetic Fluids Metric Conve
Page 278 and 279:
Oil / Synthetic Fluids • Metric C
Page 280 and 281:
Reservoir Application Fluids Chapte
Page 282 and 283:
TABLE OF CONTENTS System Benefits..
Page 284 and 285:
TABLE OF CONTENTS TABLE 6 - 19 PREP
Page 286 and 287:
RESERVOIR APPLICATION FLUIDS In pet
Page 288 and 289:
RESERVOIR APPLICATION FLUIDS Figure
Page 290 and 291:
RESERVOIR APPLICATION FLUIDS Clays
Page 292 and 293:
RESERVOIR APPLICATION FLUIDS Conden
Page 294 and 295:
RESERVOIR APPLICATION FLUIDS The Sh
Page 296 and 297:
Page 298 and 299:
RESERVOIR APPLICATION FLUIDS Struct
Page 300 and 301:
RESERVOIR APPLICATION FLUIDS contai
Page 302 and 303:
RESERVOIR APPLICATION FLUIDS throat
Page 304 and 305:
RESERVOIR APPLICATION FLUIDS soluti
Page 306 and 307:
RESERVOIR APPLICATION FLUIDS tested
Page 308 and 309:
RESERVOIR APPLICATION FLUIDS • 0.
Page 310 and 311:
RESERVOIR APPLICATION FLUIDS Under-
Page 312 and 313:
RESERVOIR APPLICATION FLUIDS Typica
Page 314 and 315:
RESERVOIR APPLICATION FLUIDS Compar
Page 316 and 317:
RESERVOIR APPLICATION FLUIDS CLEAR-
Page 318 and 319:
RESERVOIR APPLICATION FLUIDS 1.20 S
Page 320 and 321:
RESERVOIR APPLICATION FLUIDS Reserv
Page 322 and 323:
RESERVOIR APPLICATION FLUIDS Densit
Page 324 and 325:
RESERVOIR APPLICATION FLUIDS of 5%
Page 326 and 327:
RESERVOIR APPLICATION FLUIDS The te
Page 328 and 329:
RESERVOIR APPLICATION FLUIDS Brine
Page 330 and 331:
RESERVOIR APPLICATION FLUIDS Theref
Page 332 and 333:
RESERVOIR APPLICATION FLUIDS 6. Amo
Page 334 and 335:
RESERVOIR APPLICATION FLUIDS The ta
Page 336 and 337:
RESERVOIR APPLICATION FLUIDS 1 Perc
Page 338 and 339:
RESERVOIR APPLICATION FLUIDS Formul
Page 340 and 341:
RESERVOIR APPLICATION FLUIDS Metric
Page 342 and 343:
RESERVOIR APPLICATION FLUIDS Exampl
Page 344 and 345:
RESERVOIR APPLICATION FLUIDS Conver
Page 346 and 347:
RESERVOIR APPLICATION FLUIDS Exampl
Page 348 and 349:
RESERVOIR APPLICATION FLUIDS Densit
Page 350 and 351:
RESERVOIR APPLICATION FLUIDS Table
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
RESERVOIR APPLICATION FLUIDS Proper
Page 360 and 361:
RESERVOIR APPLICATION FLUIDS 50 Pou
Page 362 and 363:
RESERVOIR APPLICATION FLUIDS 220 50
Page 364 and 365:
RESERVOIR APPLICATION FLUIDS These
Page 366 and 367:
RESERVOIR APPLICATION FLUIDS The ob
Page 368 and 369:
RESERVOIR APPLICATION FLUIDS Numero
Page 370 and 371:
RESERVOIR APPLICATION FLUIDS Run th
Page 372 and 373:
RESERVOIR APPLICATION FLUIDS Water-
Page 374 and 375:
RESERVOIR APPLICATION FLUIDS select
Page 376 and 377:
RESERVOIR APPLICATION FLUIDS Choke
Page 378 and 379:
RESERVOIR APPLICATION FLUIDS Turbul
Page 380 and 381:
RESERVOIR APPLICATION FLUIDS End of
Page 382 and 383:
RESERVOIR APPLICATION FLUIDS • Pr
Page 384 and 385:
RESERVOIR APPLICATION FLUIDS BAKER
Page 386 and 387:
RESERVOIR APPLICATION FLUIDS well i
Page 388 and 389:
RESERVOIR APPLICATION FLUIDS Fluid
Page 390 and 391:
RESERVOIR APPLICATION FLUIDS Lab Va
Page 392 and 393:
RESERVOIR APPLICATION FLUIDS Progra
Page 394 and 395:
RESERVOIR APPLICATION FLUIDS • Pu
Page 396 and 397:
Page 398 and 399:
RESERVOIR APPLICATION FLUIDS REFERE
Page 400 and 401:
Chapter 7 Table of Contents BOREHOL
Page 402 and 403:
BOREHOLE PROBLEMS BOREHOLE PROBLEMS
Page 404 and 405:
BOREHOLE PROBLEMS Competent Formati
Page 406 and 407:
BOREHOLE PROBLEMS • Allow for inc
Page 408 and 409:
BOREHOLE PROBLEMS When shales react
Page 410 and 411:
BOREHOLE PROBLEMS • An unplanned
Page 412 and 413:
BOREHOLE PROBLEMS Should the pipe b
Page 414 and 415:
BOREHOLE PROBLEMS dispersion. The e
Page 416 and 417:
BOREHOLE PROBLEMS Figure 7 - 4 Mech
Page 418 and 419:
BOREHOLE PROBLEMS • High salt con
Page 420 and 421:
BOREHOLE PROBLEMS Polyglycol Shale
Page 422 and 423:
BOREHOLE PROBLEMS LOSS OF CIRCULATI
Page 424 and 425:
BOREHOLE PROBLEMS • Use of fluid
Page 426 and 427:
BOREHOLE PROBLEMS If water-absorbin
Page 428 and 429:
BOREHOLE PROBLEMS 2. Mix slurry vol
Page 430 and 431:
BOREHOLE PROBLEMS Slurry Volume (bb
Page 432 and 433:
BOREHOLE PROBLEMS accelerator is av
Page 434 and 435:
BOREHOLE PROBLEMS • Elimination o
Page 436 and 437:
BOREHOLE PROBLEMS S = pressure exis
Page 438 and 439:
BOREHOLE PROBLEMS Grogan Technique
Page 440 and 441:
BOREHOLE PROBLEMS Fluid Density (lb
Page 442 and 443:
BOREHOLE PROBLEMS V w = ⎡ C Ph
Page 444 and 445:
BOREHOLE PROBLEMS Fluid Density Ins
Page 446 and 447:
BOREHOLE PROBLEMS OMNI-LUBE is an e
Page 448 and 449:
BOREHOLE PROBLEMS Drilling Fluid Pr
Page 450 and 451:
BOREHOLE PROBLEMS Flash Point When
Page 452 and 453:
BOREHOLE PROBLEMS Planning The succ
Page 454 and 455:
BOREHOLE PROBLEMS 16. Dye, B. et al
Page 456 and 457:
Chapter 8 Table of Contents CORROSI
Page 458 and 459:
CORROSION CORROSION Chapter 8 Corro
Page 460 and 461:
CORROSION Cathode Anode 1st Step O
Page 462 and 463:
CORROSION 1. Source - Formations ar
Page 464 and 465:
CORROSION 7. Recommended Treatment
Page 466 and 467:
CORROSION Factors Coupon Dimensions
Page 468 and 469:
CORROSION Film-Forming Amines O.D.
Page 470 and 471:
CORROSION are (1) to inhibit corros
Page 472 and 473:
CORROSION 2200 2000 Conductance Mho
Page 474 and 475:
CORROSION Figure 8- 3 Oxygen Solubi
Page 476 and 477:
Chapter Nine Hydraulics Hydraulics
Page 478 and 479:
TABLE OF CONTENTS List of Figures F
Page 480 and 481:
HYDRAULICS required to do this is m
Page 482 and 483:
HYDRAULICS the Bingham Plastic, Pow
Page 484 and 485:
HYDRAULICS Figure 9 - 6 Application
Page 486 and 487:
HYDRAULICS model is generally accep
Page 488 and 489:
HYDRAULICS each portion of the circ
Page 490 and 491:
HYDRAULICS μ ep = effective viscos
Page 492 and 493:
HYDRAULICS Then solve for Q c , whe
Page 494 and 495:
HYDRAULICS ρ = fluid density, lb m
Page 496 and 497:
HYDRAULICS where: P n = total press
Page 498 and 499:
HYDRAULICS where: 2 2 1/2 1303.797
Page 500 and 501:
HYDRAULICS where: V p = -----------
Page 502 and 503:
HYDRAULICS The ability of a drillin
Page 504 and 505:
HYDRAULICS ρ = fluid density, lb m
Page 506 and 507:
HYDRAULICS SUMMARY SM ADVANTAGE Eng
Page 508 and 509:
HYDRAULICS Figure 9 - 11 Well Schem
Page 510 and 511:
HYDRAULICS 4. Calculate the Reynold
Page 512 and 513:
HYDRAULICS 24 f a = -------- Re a =
Page 514 and 515:
HYDRAULICS Exercise: Calculate the
Page 516 and 517:
HYDRAULICS NOMENCLATURE A t C C a D
Page 518 and 519:
HYDRAULICS REFERENCES 1. ADVANTAGE
Page 520 and 521:
Chapter 10 Table of Contents MECHAN
Page 522 and 523:
MECHANICAL SOLIDS CONTROL • Speci
Page 524 and 525:
MECHANICAL SOLIDS CONTROL Figure 10
Page 526 and 527:
MECHANICAL SOLIDS CONTROL Dispersio
Page 528 and 529:
MECHANICAL SOLIDS CONTROL oil fluid
Page 530 and 531:
MECHANICAL SOLIDS CONTROL Test Siev
Page 532 and 533:
Page 534 and 535:
MECHANICAL SOLIDS CONTROL Fluid (Mu
Page 536 and 537:
MECHANICAL SOLIDS CONTROL for high-
Page 538 and 539:
MECHANICAL SOLIDS CONTROL RMS Centr
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
MECHANICAL SOLIDS CONTROL NOMENCLAT
Page 546 and 547:
Chapter 11 Table of Contents HORIZO
Page 548 and 549:
HORIZONTAL AND EXTENDED REACH DRILL
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Pressure Prediction and Control Cha
Page 578 and 579:
TABLE OF CONTENTS Procedure for Pre
Page 580 and 581:
PRESSURE PREDICTION AND CONTROL Cha
Page 582 and 583:
PRESSURE PREDICTION AND CONTROL Abn
Page 584 and 585:
PRESSURE PREDICTION AND CONTROL inc
Page 586 and 587:
PRESSURE PREDICTION AND CONTROL Pre
Page 588 and 589:
PRESSURE PREDICTION AND CONTROL Pre
Page 590 and 591:
PRESSURE PREDICTION AND CONTROL DRI
Page 592 and 593:
PRESSURE PREDICTION AND CONTROL The
Page 594 and 595:
PRESSURE PREDICTION AND CONTROL Cha
Page 596 and 597:
PRESSURE PREDICTION AND CONTROL •
Page 598 and 599:
PRESSURE PREDICTION AND CONTROL Fig
Page 600 and 601:
PRESSURE PREDICTION AND CONTROL in
Page 602 and 603:
PRESSURE PREDICTION AND CONTROL •
Page 604 and 605:
PRESSURE PREDICTION AND CONTROL cap
Page 606 and 607:
PRESSURE PREDICTION AND CONTROL Oth
Page 608 and 609:
PRESSURE PREDICTION AND CONTROL Thu
Page 610 and 611:
PRESSURE PREDICTION AND CONTROL PRE
Page 612 and 613:
PRESSURE PREDICTION AND CONTROL Bak
Page 614 and 615:
PRESSURE PREDICTION AND CONTROL Bar
Page 616 and 617:
PRESSURE PREDICTION AND CONTROL Tot
Page 618 and 619:
PRESSURE PREDICTION AND CONTROL Low
Page 620 and 621:
PRESSURE PREDICTION AND CONTROL Flu
Page 622 and 623:
PRESSURE PREDICTION AND CONTROL REF
Page 624 and 625:
Deepwater Drilling Fluids Chapter T
Page 626 and 627:
TABLE OF CONTENTS List of Figures F
Page 628 and 629:
TABLE OF CONTENTS Shallow water flo
Page 630 and 631:
TABLE OF CONTENTS AQUEOUS VS NON-AQ
Page 632 and 633:
TABLE OF CONTENTS AQUEOUS SYSTEMS A
Page 634 and 635:
TABLE OF CONTENTS NEW-DRILL® Cutti
Page 636 and 637:
TABLE OF CONTENTS • Logistics are
Page 638 and 639:
TABLE OF CONTENTS Dodecahedron Gas
Page 640 and 641:
TABLE OF CONTENTS Cementing • Cem
Page 642 and 643:
TABLE OF CONTENTS HYDRATE FORMATION
Page 644 and 645:
TABLE OF CONTENTS • The ability t
Page 646 and 647:
TABLE OF CONTENTS HYDRAULIC MODELIN
Page 648 and 649:
TABLE OF CONTENTS Figure 13 - 10 Te
Page 650 and 651:
TABLE OF CONTENTS graphically too.
Page 652 and 653: TABLE OF CONTENTS REFERENCES 1. Zam
Page 654 and 655: Chapter Fourteen Fluids Environment
Page 656 and 657: TABLE OF CONTENTS Filtration of Gra
Page 658 and 659: FLUIDS ENVIRONMENTAL SERVICES The w
Page 660 and 661: FLUIDS ENVIRONMENTAL SERVICES have
Page 662 and 663: FLUIDS ENVIRONMENTAL SERVICES Early
Page 664 and 665: FLUIDS ENVIRONMENTAL SERVICES Infor
Page 666 and 667: FLUIDS ENVIRONMENTAL SERVICES Step
Page 668 and 669: FLUIDS ENVIRONMENTAL SERVICES • S
Page 670 and 671: FLUIDS ENVIRONMENTAL SERVICES in or
Page 672 and 673: FLUIDS ENVIRONMENTAL SERVICES OPERA
Page 674 and 675: FLUIDS ENVIRONMENTAL SERVICES Lesso
Page 676 and 677: FLUIDS ENVIRONMENTAL SERVICES BEST
Page 678 and 679: FLUIDS ENVIRONMENTAL SERVICES • P
Page 680 and 681: FLUIDS ENVIRONMENTAL SERVICES • R
Page 682 and 683: FLUIDS ENVIRONMENTAL SERVICES WASTE
Page 684 and 685: FLUIDS ENVIRONMENTAL SERVICES Therm
Page 686 and 687: FLUIDS ENVIRONMENTAL SERVICES th e
Page 688 and 689: FLUIDS ENVIRONMENTAL SERVICES SEPAR
Page 690 and 691: FLUIDS ENVIRONMENTAL SERVICES Decan
Page 692 and 693: FLUIDS ENVIRONMENTAL SERVICES • D
Page 694 and 695: FLUIDS ENVIRONMENTAL SERVICES • H
Page 696 and 697: FLUIDS ENVIRONMENTAL SERVICES Main
Page 698 and 699: FLUIDS ENVIRONMENTAL SERVICES PROCE
Page 700 and 701: FLUIDS ENVIRONMENTAL SERVICES DIMEN
Page 704 and 705: FLUIDS ENVIRONMENTAL SERVICES • H
Page 706: FLUIDS ENVIRONMENTAL SERVICES CUTTI
Page 710: FLUIDS ENVIRONMENTAL SERVICES TRANS
Page 714: FLUIDS ENVIRONMENTAL SERVICES TRANS
Page 717: FLUIDS ENVIRONMENTAL SERVICES Typic
Page 721: FLUIDS ENVIRONMENTAL SERVICES BAKER
Page 724 and 725: FLUIDS ENVIRONMENTAL SERVICES Fluid
Page 726 and 727: FLUIDS ENVIRONMENTAL SERVICES A typ
Page 728 and 729: FLUIDS ENVIRONMENTAL SERVICES Featu
Page 730 and 731: FLUIDS ENVIRONMENTAL SERVICES Cartr
Page 732 and 733: FLUIDS ENVIRONMENTAL SERVICES surfa
Page 734 and 735: GLOSSARY OF TERMS Chapter 15 GLOSSA
Page 736 and 737: GLOSSARY OF TERMS Aluminum Stearate
Page 738 and 739: GLOSSARY OF TERMS asphaltenes. Asph
Page 740 and 741: GLOSSARY OF TERMS controlled enviro
Page 742 and 743: GLOSSARY OF TERMS hole-cleaning cap
Page 744 and 745: GLOSSARY OF TERMS Cloud Point - The
Page 746 and 747: GLOSSARY OF TERMS Cycle (Circulatio
Page 748 and 749: GLOSSARY OF TERMS Dissociation - Th
Page 750 and 751: GLOSSARY OF TERMS Fiber or Fibrous
Page 752 and 753:
GLOSSARY OF TERMS Fluid Flow - The
Page 754 and 755:
GLOSSARY OF TERMS Gel Strength - Th
Page 756 and 757:
GLOSSARY OF TERMS Homogeneous - Of
Page 758 and 759:
GLOSSARY OF TERMS Hydrophilic-Lypop
Page 760 and 761:
GLOSSARY OF TERMS Iodine Number - T
Page 762 and 763:
GLOSSARY OF TERMS Limestone - See C
Page 764 and 765:
GLOSSARY OF TERMS Micron (µ) = MU
Page 766 and 767:
GLOSSARY OF TERMS Neat Cement - A s
Page 768 and 769:
GLOSSARY OF TERMS Percent - For wei
Page 770 and 771:
GLOSSARY OF TERMS not that space is
Page 772 and 773:
GLOSSARY OF TERMS Resistivity - The
Page 774 and 775:
GLOSSARY OF TERMS complex structure
Page 776 and 777:
GLOSSARY OF TERMS Sodium Bicarbonat
Page 778 and 779:
GLOSSARY OF TERMS Streaming Potenti
Page 780 and 781:
GLOSSARY OF TERMS Thixotropy - The
Page 782 and 783:
GLOSSARY OF TERMS Viscosity, Funnel
show all

BAKER HUGHES - Drilling Fluids Reference Manual

Create successful ePaper yourself

Delete template?

Save as template?