BAKER HUGHES - Drilling Fluids Reference Manual

HORIZONTAL AND EXTENDED REACH DRILLING
REFERENCES
1. Aadnoy, B. S. and Chenevert, M. E., Stability of Highly-Inclined Boreholes, SPE/IADC
16052, Presented at the 1987 Drilling Conference.
2. Bradley, W. B., Mathematical Concept - Stress Cloud Can Predict Borehole Failure, Oil and
Gas Journal, February 19, 1979.
3. Bradley, W.B., Failure of Inclined Wellbores, Transactions of the ASME, Journal of Energy
Resources Technology, December 1979, Vol. 101 / 239
4. Chenevert, M. E., Shale Control with Balanced Activity Oil-Continuous Muds, Journal
Petroleum Technology, October 1970, pp. 1309-1316; Trans AIME, Vol. 249.
5. Nance, W. B., How to Select Oil Mud Applications, Petroleum Engineer International, January
1984, pp. 30-38.
6. O'Brien, D. E. and Chenevert, M. E., Stabilizing Sensitive Shales with Inhibited Potassium-
Based Drilling Fluids, Journal Petroleum Technology, September 1973, p. 189; Trans AIME,
Vol. 255.
7. Chesser, B. G., Design Considerations for an Inhibitive and Stable Water-Base Mud System,
SPE Drilling Engineering, December 1987, pp.331-336.
8. Clark, R. K., Scheuerman, R. K., Rath, H., and van Laar, H., Polyacrylamide/Potassium -
Chloride Mud for Drilling Water-Sensitive Shales, Journal Petroleum Technology, June 1976,
pp. 719-727; Trans AIME, Vol. 261.
9. Bol, G. M., The Effect of Various Polymers and Salts on Borehole and Cuttings Stability in
Water-Base Shale Drilling Fluids, SPE/IADC 14802, Presented at the 1986 Drilling
Conference, Dallas, Texas.
10. Davis, Neal and Tooman, C. E., New Laboratory Tests Evaluate the Effectiveness of Gilsonite
Resin as a Borehole Stabilizer, SPE Drilling Engineering, March 1989.
11. Walker, R. E. and Mayes, T. M., Design of Muds for Carrying Capacity, Journal Petroleum
Technology, July 1975, pp. 893-900.
12. Sifferman, R. T., Myers, G. M., Haden, E. L., and Wall, H. A., Drill-Cuttings Transport in Full-
Scale Vertical Annuli, Journal Petroleum Technology, November 1974, pp. 1295-1302.
13. Hopkin, E. A., Factors Affecting Cuttings Removal During Rotary Drilling, Journal Petroleum
Technology, June 1967, pp. 807-814; Trans AIME, Vol. 240.
14. William, C. E. and Bruce, G. H., Carrying Capacity of Drilling Fluids, Trans AIME, Vol. 192,
195, pp. 111- 120.
15. API Bulletin 13D, The Rheology of Oil-Well Drilling Fluid, Second Edition, May 16, 1985.
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006. 11-26