BAKER HUGHES - Drilling Fluids Reference Manual

PRESSURE PREDICTION AND CONTROL
Baker Hughes DRILLING FLUIDS Well Control Kill Sheet
BASIC DATA
RECORD
a. True Vertical Depth (TVD) ft k. Shut-in Drillpipe Pressure (SIDP) psi
b. Measured Depth (MD) ft l. Shut-in Casing Pressure (SICP) psi
c. Fluid (Mud) Weight (M.W.) ppg m. Kick Volume bbl
d. Drillpipe Volume bbl CALCULATE
e. Riser Volume bbl n. Initial Circulating Pressure (ICP):
SCP + SIDP = ICP: _________ + _________ = ________
f. Pump Output bbl/stk
g. Drillpipe Strokes stks o. New Fluid (Mud) Weight:
SIDP / .052 / Depth + Old M.W. = New M.W.
_________ / .052 / _________ + _________ = _________ ppg
h. Strokes to Displace Riser stks
i. Slow Circulating Pressures (SCP):
Riser or Casing
Pump #1: _________ psi @ _________ SPM
Pump #2: _________ psi @ _________ SPM
Choke Line (SUBSEA)
Pump #1: _________ psi @ _________ SPM
Pump #2: _________ psi @ _________ SPM
j. Choke Line Friction (CLF):
SCP Choke Line SCP Riser = CLF
_________ _________ = _________
3000
p. Final Circulating Pressure (FCP):
New M.W. / Old M.W. × SCP = FCP
_________ / _________ × _________ = _________ psi
q. Maximum Allowable Casing Pressure:
(Fracture M.W. Present M.W.) × Casing Depth × .052
( _________ _________ ) × _________ × .052 = _________psi
GRAPHICAL ANALYSIS OF PUMPING SCHEDULE
2000
1000
Pump Strokes
Pressure
Fluid (Mud) Wt
Minutes
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006 12-33