BAKER HUGHES - Drilling Fluids Reference Manual

PRESSURE PREDICTION AND CONTROL
REFERENCES
1. Baker Hughes DRILLING FLUIDS, Formation Pressure Evaluation, Reference
Guide, Rev. B January 1996.
2. Barker, J. W. and Gomez, R. K., Formation of Hydrates During Deepwater
Drilling Operations, Journal of Petroleum Technology, March 1989, pp. 297-301.
3. Bryant, T. S. and Grosso, D. S., Gas Influx Detection Using MAD Technology,
IADC/SPE 19973, Presented at the 1990 IADC/SPE Drilling Conference, Houston,
Texas.
4. Dawson, Rapier and Morrison, Betty, Barite-plug Design for Better Well Control,
Oil and Gas Journal, March 8, 1982, pp. 176-187.
5. Eaton, Ben A., Fracture Gradient Prediction and Its Application in Oilfield
Operations, SPE Journal, October 1969, p. 1353.
6. Fertl, Walter H. and Timko, Donald J., Parameters for Identification of
Overpressure Formations, Paper No. 3223, SPE of AIME, 1971.
7. Goins, W. C. Jr., How to Prevent Blowouts, World Oil, October 1968.
8. Goins, W. C., Jr. and O'Brien, T. B., Blowouts and Well Kicks: What you Need to
Know About Them, Oil and Gas Journal, June 20, 27, July 4, and October. 5, 1962.
9. Goins, W. C. Jr. and Sheffield, Riley, Blowout Prevention, 2nd Edition Gulf
Publishing Company, 1983.
10. Hornung, M. R., Kick Prevention, Detection, and Control: Planning and Training.
Guidelines for Drilling High Pressure Gas Wells, SPE Paper 19990.
11. Hottmann, C. E. and Johnson, R. K., Estimation of Formation Pressures from Log-
Derived Shale Properties, Journal of Petroleum Technology, June 1965.
12. Jorden, J. R. and Shirley, 0. J., Application of Drilling Performance Data to
Overpressure Detection, Journal of Petroleum Technology, November 1966.
13. Rehm, B., and McClendon, R.T., “Measurement of Formation Pressure From
Drilling Data,” 46 th AIME Fall Meeting, New Orleans, October 1971.
14. Matthews,W.R. and Kelly, John, How to Predict Formation Pressure and Fracture
Gradient, Oil and Gas Journal, February 1967.
15. Messenger, J. U., Barite Plugs, Presented at Spring Meeting of the Southwestern
District Division of Production, API, Lubbock, Texas, March 1969.
16. O'Brien, T.B., Handling Gas in an Oil Mud Takes Special Precautions, January
1981, pp. 83-86.
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006 12-43