BAKER HUGHES - Drilling Fluids Reference Manual

BOREHOLE PROBLEMS
16. Dye, B. et al, Design Considerations for High Performance Water-Based Muds, AADE
Paper AADE-04-DF-HO-14, presented April 2004.
17. van Oort, E. et al, Silicate-Based Drilling Fluids: Competent, Cost-effective and Benign
Solutions to Wellbore Stability Problems, IADC/SPE Paper 35059, 1996.
18. Bland, R.G., et al, Low Salinity Polyglycol Water-Based Drilling Fluids as Alternatives
to Oil-Based Mud, SPE Paper 29378, Presented 1995.
19. Steiger, R.P., Fundamentals and Use of Potassium/Polymer Drilling Fluids to Minimize
Drilling and Completion Problems Associated with Hydratable Clays, SPE Paper 10100,
Presented 1981.
20. Operation Manual Fluids – NOR-OP-FL1-2003
21. Aston, M.S. et al, Drilling Fluids for Wellbore Strengthening, SPE/IADC Paper 87130,
Presented 2004.
22. Davison, J.M., et al, Extending the Drilling Operating Window in Brent: Solutions for
Infill Drilling in Depleting Reservoirs, SPE Paper 87174, Presented 2004.
23. Helmick, W.E. and Longley, A.J., Pressure Differential Sticking Drill Pipe and How It
Can Be Avoided or Relieved, API Meeting, Los Angeles, California, May 16-17, 1975.
24. Grogan, Gene E., How to Free Stuck Drill Pipe, Oil and Gas Journal, April 4, 1966.
25. Laboratory and Field Test Data on Borehole Lubricants, Milpark (Baker Hughes
Drilling Fluids) Technical Memorandums.
26. Moses, P.L., Geothermal Gradients, API Paper 926-6- K, March 1961.
27. Annis, Max R., Jr., High Temperature Flow Properties of Water-Base Drilling Fluids,
SPE Paper 1861, Presented at the Fall Meeting of SPE, October 1, 1967.
20. Dye, William, et. al., Drilling Processes: The Other Half of the Barite Sag
Equation, SPE Paper 80495, Presented at the SPE Asia Pacific Oil and Gas
Conference and Exhibition held in Jakarta, Indonesia, September 9-11, 2003
21. Leyendecker, E.A., and Murray, S. C., Properly Prepared Oil Muds Aid Massive Salt
Drilling, World Oil, April 1975
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006 7-53