UNIFORM REGULATIONS - U.S. Coast Guard

COMDTINST M1020.6G
_____________________________________________________________
3.D.10. ENLISTED HEADGEAR INSIGNIA
Combination Cap
For E-6 and below, the insignia is a 1¾ inch silver and gold Coast Guard medallion. Attach
the insignia to the mount of the combination cap band. For E-7 through E-9 and MCPOCG,
the combination cap insignia is a gold-colored fouled anchor 1¾ inches long, including ring
and fouling, with the appropriate number of stars affixed to the ring or stock of the anchor.
The insignia are mounted on the combination cap band.
E-7 through E-9 and MCPOCG E-6 and below
Garrison Cap
Cap devices are worn on the wearer’s left as follows:
For E-1 through E-3 a miniature version of the Coast Guard
medallion, approximately 1 inch in size.
For E-4 through E-6 an appropriate collar rate/pay grade
insignia.
For E-7 through E-9 and MCPOCG, a miniature version of
the combination cap anchor, approximately 1-3/8 inches
high.
Standard Ball Cap and Unit Ball cap
The insignia worn on the ball cap will be the standard metal
collar insignia. All insignia will be centered on the front
of the cap so as to not interfere with the lettering.
Standard Ball Cap - Centered between the lettering and
the bill of the cap. Unit Ball Cap - Centered between the
lettering above and lettering below.
3-72
The center of the insignia is
placed 1½ inch from the bottom
of the cap, and 2 inches back
from the front crease.