Datascope - Mindray
Datascope - Mindray
Datascope - Mindray
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembly Installation Guide<br />
2.2 Assembly<br />
2.2.1 Unpacking<br />
NOTE: The AS3000 Breathing System Block is matched to the<br />
AS3000 it is attached to by calibration and installation.<br />
After removing the Breathing System Block from the<br />
Mounting Arm of the AS3000, assure that the Breathing<br />
System Block is returned to the same AS3000 that it came<br />
from originally.<br />
1. Inspect the two boxes for any damage, check the tip watches, and report any damage<br />
or sign of tipping to the dispatcher.<br />
2. Ensure the serial numbers on both carton labels match prior to assembling the system.<br />
3. Remove the shipping straps and caps from the 2 boxes.<br />
4. Remove the foam from inside the top of the box.<br />
5. Remove the Corrugated box from around AS3000.<br />
6. Remove the bag and shrink wrap from around AS3000.<br />
7. Remove the foam from AS3000 casters.<br />
2.2.2 Breathing System and Breathing System Accessories<br />
4<br />
3<br />
2<br />
1<br />
5<br />
FIGURE 2-1 The AS3000 and accessories<br />
1. AGSS 2. Breathing System<br />
3. User Interface Mounting Arm 4. User Interface<br />
5. Patient Monitor Mounting Arm 6. O 2 Cable<br />
7. Pneumatic Hose Assembly 8. Heater Cable<br />
9. Drive Gas 10. Breathing System Mounting Arm<br />
11. AGSS Transfer Hose 12. CGO Port<br />
2 - 2 0070-10-0683 AS3000 Service Manual<br />
6<br />
8 9 10<br />
7<br />
11<br />
12