27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72PVC SCHEDULE 40 PIPESAFE FORCONVEYINGPOTABLE WATERSPECIFICATIONS• N.S.F.: All PVC Pipe from the Ryan Herco Flow Solutions will meet or exceed the requirements of theNational Sanitation Foundation No. 61 for conveying potable water.• ASTM: The material used in the manufacture of pipe for the Ryan Herco Flow Solutions will meetASTM-D-1784-65T for a PVC Type 1 material. The Schedule 40 and Schedule 80 Pipe conforms toASTM-D-1785.• CS (Commercial Standard): CS-207-60 is the industry standard for Schedule 40 and Schedule 80 PVCpipe, and is met by pipe from the Ryan Herco Flow Solutions in both schedules. PVC pipe meeting thisspecification has the same O.D. and I.D. as the corresponding schedule of iron or galvanized pipe.20 ft. length standardORDER: 3900.(Size No.) PVC PIPE, SCHEDULE 40SizeNo.Nom. PipeSize (in.)O.D.(in.)O.D.(mm)AverageI.D. in.AverageI.D. (mm)Minimum WallThickness in.Minimum WallThickness (mm)Nom.Wt.(lbs./100 ft.)Max. WorkPressure (psi)*Price/ ft002 1/4 0.540 (13.7) 0.344 (8.7) 0.088 (2.2) 7.8 780 $0.42003 3/8 0.675 (17.1) 0.473 (12.0) 0.091 (2.3) 10.5 620 0.56005 1/2 0.840 (21.3) 0.602 (15.3) 0.119 (2.8) 16.4 600 0.28007 3/4 1.050 (26.7) 0.804 (20.4) 0.123 (2.9) 21.8 480 0.36010 1 1.315 (33.4) 1.029 (26.1) 0.143 (3.6) 32.1 450 0.52012 1-1/4 1.660 (42.2) 1.360 (34.5) 0.150 (3.8) 370 0.70015 1-1/2 1.900 (48.3) 1.590 (40.4) 0.155 (3.9) 330 0.82020 2 2.375 (60.3) 2.047 (52.0) 0.164 (4.1) 280 1.10025 2-1/2 2.875 (73.0) 2.445 (62.1) 0.215 (5.4) 300 1.74030 3 3.500 (88.9) 3.042 (77.3) 0.229 (5.9) 260 2.28040 4 4.500 (114.3) 3.998 (101.5) 0.251 (6.3) 220 3.26050 5 5.563 (141.3) 5.015 (127.4) 0.273 (6.9) 272.6 190 4.44060 6 6.625 (168.3) 6.031 (153.2) 0.297 (7.5) 180 5.70080 8 8.625 (219.1) 7.941 (201.7) 0.341 (8.7) 160 8.64SCHEDULE 40 LARGE-DIAMETER PROCESS PIPEWe can square-cut pipe to your requirements.Minimum available quantity is one length.20 ft. length standard100 10 10.750 (273.1) 9.976 (253.4) 0.365 (9.3) 140 $11.90120 12 12.750 (323.9) 11.890 (302.0) 0.406 (10.3) 130 15.72140 14 14.000 (356.0) 13.072 (332.0) 0.438 (11.1) 1181.0 130 21.37160 16 16.000 (406.0) 14.940 (379.0) 0.500 (12.7) 1542.0 130 27.90180 18 18.000 (457.2) 16.809 (426.9) 0.562 (14.3) 2011.2 130 39.63200 20 20.000 (508.0) 18.743 (476.1) 0.593 (15.1) 2362.4 120 60.79240 24 24.000 (609.6) 22.540 (572.6) 0.687 (17.4) 3287.3 120 84.57*Maximum working pressure is calculated at 73°F.NOT RECOMMENDED FOR COMPRESSED AIR OR GAS110.110.010LARGE DIAMETER MOLDEDPIPE FITTINGSFEATURES• We have tees and elbows available, injection-molded fromtype 1 PVC at 73°F for the pressures (listed at ambienttemperatures) shown in parentheses.• Ten through sixteen-inch couplings are fabricated fromSchedule 40 PVC pipe.• Complete listings of other fabricated fittings appear onpages 144-145.TEES, all-socket, PVC3401.100 Tee, 10” (140 psi) $808.713401.120 Tee, 12” (130 psi) 1,194.9190° ELL, socket x socket, PVC3406.100 Ell, 10” (140 psi) 649.643406.120 Ell, 12” (130 psi) 871.3045° ELL, socket x socket, PVC3417.100 Ell, 10” (140 psi) 424.413417.120 Ell, 12” (130 psi) 628.93COUPLING, socket x socket, PVC3429.100 Coupling, 10” (140 psi) 75.273429.120 Coupling, 12” (130 psi) 110.803429.140F Coupling, 14” (130 psi) 179.913429.160F Coupling, 16” (130 psi) 200.66110.130.110 Tee110.130.120 Elbow110.150.140 Cplg132