27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72CIRCULAR PEN RECORDERSFEATURES• Up to 2 process or limit alarmsfor each pen. Normally open andnormally closed contacts available;they can be high or low processor low limit/ latching with manualreset.• Optional digital communicationspackage: Access process values,alarm conditions, and other data,RS-485 com. utilizing MODBUSRTU protocol allows the MRC5000 to communicate with virtuallyany software package on themarket.• Use a PC to modify,save, or download for ultimateprogramming ease utilizing theoptional configuration port.• Setup/ calibration seal protectsfrom unauthorized changes.• 1 or 2 trend pen versions.• Convenient, compact size with acommon 12.7” cutout.• Universal inputs and power supply.• NEMA 3 standard (NEMA 4Xoptional) for protection againstharsh environments.• Simple operation and set-up.• Two-year warranty againstmanufacturing defects.• Approvals: UL, C-UL, CE, & FM.APPLICATIONS• pH/ORP monitoring.• Waste treatment.• Water quality.• Food & beverage.• Metal/ surface finishing.• Environmental compliance.• Process control.MRC 5000 circular recorder.ACCESSORY ITEMS• Extra charts, 100 per box (specify range).• Additional surface mounting brackets.• Pen 1, red replacement ink cartridges (5 perpack).• Pen 2, green replacement ink cartridge (5 perpack).SUBSTITUTE ITEMS• Strip chart recorders.• Event recorders.• Data loggers.SPECIFICATIONS• The MRC 5000 operation is so easy that all ofits instructions fit on one 4” x 6” card. It comesin two basic versions for trend recording - one ortwo pens.• The operator interface, a four-digit displaywith three-button keypad, is made for simpledaily operation and easy configuration. A clearprompting scheme provides rapid accessto all configuration and operation data. Theoperator interface also provides access to testand calibration facilities with a convenient dualfunction mode switch.• Optional configurator port for ultimateprogramming ease. Using the optional PCprogram, parameters can be modified, saved,and downloaded in seconds.• Only one jumper to configure each port. Thetwo pens, each with configurable spans, arepositioned smoothly without any slidewirefeedback; this simplifies design and improvesreliability. In addition, the 10” chart rotates at thespeed you select.• Compact 2.5” panel depth and short 1.3”protrusion from the front panel.• MRC 5000 is NEMA 3 rated standard.• See opposite page for additional specifications.®MRC 5000 ORDERING INFORMATION:To create a part number, fill in the boxes below with the appropriatenumber and/or letter from the corresponding box below5 A B C D EF G H HBox A: Pen 11 = Recorder only2 = Recording Controller4 = High/Low LimitDoes not include a relay. Order relays in output options.Box B: Pen 20 = None1 = Recorder only2 = Recording Controller4 = High/Low Limit*Does not include a relay. Order relays in output options.Box C: Pen 1 Outputs0 = None1 = One Relay2 = Two RelaysBox D: Pen 2 Outputs0 = None1 = One Relay2 = Two RelaysBox E: Digital Communications0 = None1 = Configurator Port2 = RS-485 Coms3 = Configurator Port & RS-485 ComsBox F: Case1 = Standard NEMA32 = Door Lock3 = NEMA 4XBox G: Voltage1 = Standard (90-264V AC)3 = Transmitter Power Supply 24V DC5 = CE7 = CE and transmitter power supplyBox H: Option Suffix- = NoneAA = Alarms and communications connectivity option(allows for later field installation of both options)$653.00670.00670.00N/C$232.00243.00243.00N/C$82.00149.00N/C$82.00149.00N/C$55.0055.0055.00N/C$79.0079.00N/C$89.0025.00114.00N/C$34.00One hundred 0-100°F, 24-hour charts are provided with each instrument. Specify non-standardcharts. One set of mounting brackets is supplied with each recorder.560.120.130372