27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

More documents

Recommendations

Info

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72LUTZ DRUM & BARREL PUMPSFEATURES• Empties a drum in less than two minutes.• All components are interchangeable to meet your needs in thesafe, fast, economical transfer of liquids.• Over 100 combinations: With seven motors and six pump tubesin three lengths, you can design a pump for your specific needs.• Selection is simple: Select the motor, type of pump tube and lengthof tube by using the handy guides to choose components thatmeet all your drum pump applications. The individual componentscan be purchased without any penalty as requirements change.• The electric motors have an easily accessible on/off switch anda 16-foot, three-wire, oil-and acid-resistant cord. Simply insert itinto the liquid for immediate pumping. No priming needed.INTERCHANGEABLE MOTOR GUIDESeeSuitable for Motor Maximum Max.Part PumpHazardous Wt. Viscosity Spec.No. Curve MotorDuty (lbs.) (cps) Grav.6500 B-36 115V/60 Hz/640 Watts No 4.2 750 1.86506 B-28 115V/60 Hz/800 Watts No 7.5 750 1.86509 B-36SC 115V/60 Hz, 200V/50 No 4.2 750 1.8Hz6503 B-55T 115V/50/60 Hz/ 510 No 11.3 750 1.8Watts6507 ME 1-6 120V/60 Hz/640 W(U/L)*Yes 14.3 750 1.86504 4GT 7500 rpm @ 87 psi Yes 1.0 150 1.46501 MD-2 7500 rpm @ 92 psi Yes 4.0 320 1.4*U/L-listed Class I-B, C, D; Class II-G; explosion-proof.B-36 MotorSPECIFICATIONS• 115V /50/60/1/640W.• Not suitable for hazardous duty; double-insulated; thermal overload protected; includesautomatic reset, a 16-foot cord and a molded plug. The weight is 4.2 pounds.• Maximum viscosity, 750 cps; maximum specific gravity, 1.8PUMP TUBES:Order separatelyfrom page 489.ORDER: 6500.000 $354.00B-36 SC MotorSPECIFICATIONS• 115V /50/60/1/640W.• Not suitable for hazardous duty. This is the B-36 motor with an electronic speed controller.Head in FeetImpe ler670.110.160-170B-36 & B-36 SC54463834262014600 5 10 15 20 25 30 35 40 45 50Water-60°F Gallons Per MinuteRotorORDER: 6509.000 $419.00B-28 MotorSPECIFICATIONS• 115V /50/601/800W.• Not suitable for hazardous duty; thermal overload protected; automatic reset; includes an on/off switch designed for fingertip control. The unit also ships with a 16-foot cord and moldedplug. The weight is 7.5 pounds.• Maximum viscosity, 750 cps; maximum specific gravity, 1.8ORDER: 6506.000 $392.00B55T MotorSPECIFICATIONS• 115V /50/60/1/510W. 220V optional.• Totally enclosed fan cooled; double-insulated, thermal overload protected; includesautomatic reset, a 16-foot cord, three-wire with ground wire and molded plug. The weight is11.3 pounds.• Maximum viscosity, 750 cps; maximum specific gravity, 1.8.ORDER: 6503.000 $590.00ME 1-6 MotorSPECIFICATIONS• 120V /60/1/640W.• U.L. listed-Class I, Groups C and D; Class II, Groups F and G; explosion proof; thermaloverload protected; has automatic reset. The unit also includes a 16-foot cord, and a threewirewith ground wire. An explosion-proof plug is not included. The weight is 14.3 pounds.• Maximum viscosity, 750 cps; maximum specific gravity, 1.8. Includes electronic speedcontrollerORDER: 6507.000 $905.004-GT MotorSPECIFICATIONS• 7,500 RPM @ 87 PSI, 14 CFM.• This pneumatic, 1/8” air-line connection is recommended for use with an automatic oiler andmoisture trap. The weight is one pound.• Maximum viscosity, 150 cps; maximum specific gravity, 1.4.ORDER: 6504.000 $292.00MD-2 EX MotorSPECIFICATIONS• 7,500 RPM @ 90 PSI, 17 CFM.• Pneumatic, 3/8” air-line connection; flame-proof muffler and filter; automatic oiler andmoisture trap recommended; suitable for hazardous duty. The total weight is four pounds.• Maximum viscosity, 320 cps; maximum specific gravity, 1.4.ORDER: 6501.000 $598.00Head in FeetHead in FeetHead in FeetHead in FeetHead in FeetB-2860524236282216800 5 10 15 20 25 30 35 40 45 50 55Water-60°F Gallons Per MinuteB-55T54463834262014Impeller600 5 10 15 20 25 30 35 40 45 50Water-60°F Gallons Per MinuteME 1-660504030201000 5 10 15 20 25 30 35 40 45 50Water-68°F Gallons Per Minute4GT54463834262014ImpellerMD-2EX54463834262014600 5 10 15 20 25 30 35 40 45 50ImpellerImpellerImpellerRotorRotorRotorRotorRotor600 5 10 15 20 25 30 35 40 45 50Water-60°F Gallons Per MinuteWater-60°F Gallons Per Minute488
LUTZ DRUM & BARREL PUMPSSEAL-LESS PUMP TUBESFEATURES• High Performance• Runs Dry Without Damage• Seal-less series pump tubes can run dry without damage toeither the pump or motor.• A patented Teflon sleeve prevents the material fromprogressing up the pump shaft.• Impeller design maximizes performance on high-viscosityand high-specific-gravity material.• The motor and pump tube must be ordered separately. Anymotor listed and described on the previous page will assembleto any Lutz pump tube described below.ORDER: 6505.(Size No.) SEAL-LESS PUMP TUBESize LengthType of Hose PriceNo. (in.) Material Seal Connection Each216 27 Polypro Seal-less 3/4” $328.00516 39 Polypro Seal-less 3/4” 356.00416 47 Polypro Seal-less 3/4” 368.00217 27 Stainless Seal-less 1” 505.00517 39 Stainless Seal-less 1” 572.00417 47 Stainless Seal-less 1” 605.00218 27 Kynar Seal-less 1” 550.00318 39 Kynar Seal-less 1” 650.00418 47 Kynar Seal-less 1” 692.00ORDER: 6505.(Size No.) SEALED PUMP TUBE670.110.110SizeNo.Length(in.) MaterialType ofSealHoseConnectionPriceEach211 27 Polypro Mechanical 3/4” $309.00511 39 Polypro Mechanical 3/4” 373.00411 47 Polypro Mechanical 3/4” 383.00212 27 316 SS Mechanical 1” 505.00512 39 316 SS Mechanical 1” 572.00412 47 316 SS Mechanical 1” 605.00215 27 Aluminum Mechanical 1” 410.00515 39 Aluminum Mechanical 1” 432.00415 47 Aluminum Mechanical 1” 386.30670.110.120LAB PUMP AND MOTORFEATURES• Designed for emptyingsmall quantities of wateror other non-hazardousliquids from carboysor other narrow-neckcontainers, this Lutzlaboratory drum pump isavailable in three models:Polypropylene with a 25”or 34” tube and stainlesssteel with a 34” tube.The maximum flow is 16GPM, and the maximumhead is 24 feet.• These models areoffered with kits thatinclude a wall bracket, curved spout, five feet of PVC hose,two hose clamps and a quick-release nozzle.• The pumps’ light weight—four pounds for the Polypro model,five pounds for the stainless—makes them easy to handle.The single-phase open motors, which are 110-120VAC, 50/60Hz, have thermal overload protection with a mechanical reset.The liquids to be handled must not exceed 380-centistokeviscosity and 1.4 specific gravity.• The Polypro models have a Polypropylene inner and outertube with a Hastelloy-C drive shaft, a Teflon shaft sleeve anda polypro rotor. The stainless models have a stainless inner/outer tube with a stainless drive shaft, a Teflon shaft sleeveand a Teflon rotor.ORDER: 6508. LABORATORY DRUM PUMP & MOTOR216 Polypropylene, 25” tube $400.00316 Polypropylene, 39” tube 458.00317 Stainless Steel, 39” tube 630.00236 Polypropylene, 25” tube, with kit 510.00336 Polypropylene, 39” tube, with kit 568.00337 Stainless, 39” tube, with kit 740.00670.120.1106505.517Tube6506.000Motor6500.000Motor6505.511Tube6503.000Motor6505.211TubeALSO AVAILABLEDRUM & BARREL PUMP ACCESSORIES• Hand Regulator Nozzle(Available in Polypro, PVDF, & Stainless Steel)• Polypro Fume Barrier• Battery Operated Lab Pump & Motor(Polypropylene 39” tube, available with kit)• Batch Controller for Drum Pump.Contact your local Ryan Herco Flow Solutions ServiceCenter for details at 1-800-848-1141MOTORS:Order separatelyfrom page 488.Pumps and containers should beproperly grounded to eliminate thepossibility of electrostatic discharge.1-800-848-1141www.rhfs.com489
Page 1 and 2:
www.rhfs.com1-800-848-1141Locations
Page 3 and 4:
GET THE RHFS ADVANTAGE!Extensive Pr
Page 5 and 6:
RYAN HERCO flow solutionsFiltration
Page 7 and 8:
RHFS SERVICE CENTERSCall your most
Page 9 and 10:
NW 87thCt.NW 102nd St.RHFS SERVICE
Page 11 and 12:
SECTIONAL PRODUCT INDEXPage 23TUBIN
Page 13 and 14:
DETAILED PRODUCT INDEXDESCRIPTIONPA
Page 15 and 16:
Page 17:
Page 20 and 21:
Ryan Herco Logo-4 Color ProcessElem
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441: Ryan Herco Logo-4 Color ProcessElem
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644:
Tubing & Tube FittingsInstrumentati
show all

27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Create successful ePaper yourself

Delete template?

Save as template?