27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

John GUEST SPEEDFITSHUT-OFF VALVESPolypropylene long handle valves shown.VALVE MOUNTINGBRACKETFEATURES• For 3/8” straight valve configuration.• Designed for a very firm grip.• A twisting action removes the valve.• When used with short handled valves,multiple valves can be banked together.ORDER:5314.900 MOUNTING BRACKET $1.69070.110.900FEATURES• Choose from three styles:Speedfit to Speedfit straightconnector; Speedfit to maleMNPT straight connector;Speedfit to female MNPTelbow connector.• 1/4 turn operation.• Nitrile O-ring.APPLICATIONS• Potable liquids.• CO 2lines in beveragedispensing.• Pneumatics.• Robotics,• Compressed air.SUBSTITUTE ITEMS• Also available in 3/8”Speedfit x 1/4” FNPTFemale Elbow.• Tubing valves, pages 76.SPECIFICATIONSPolypropylene• Max. 150 PSI at 70°F(10 bar at 20°C), water.ORDER INFORMATION:5313.(Size No.) SPEEDFIT POLYPRO SHUT-OFF VALVE5314.(Size No.) SPEEDFIT ACETAL SHUT-OFF VALVE• Max 60 PSI at 140°F (4bar at 60°C), water.• Min. 33°F (1°C), water.Acetal• Max 150 PSI at -4°F(10 bar at -20°C), air(3/8” - 1/2” sizes).• Max. 150 PSI at 73°F(10 bar at 23°C), air/potable liquids (3/8”size only).• Max. 100 psi at 158°F(7 bar at 70°C), air/potable liquids (3/8” -1/2” sizes).070.110.180 PP070.110.185 AcetalSize NoNominalSize (in.) Material Configuration Handle Type End ConnectionPriceEach5313.002 1/4 Polypro Straight Long Speedfit x Speedfit $6.345313.012 1/4 Polypro Straight Long Speedfit x Male 6.345313.222 1/4 Polypro 90° Elbow Long Speedfit x Speedfit 6.995313.103 3/8 Polypro Straight Long Speedfit x Speedfit 6.705313.113 3/8 Polypro Straight Long Speedfit x Male 6.705314.003 3/8 Acetal Straight Long Speedfit x Speedfit 13.345314.103 3/8 Acetal Straight Short Speedfit x Speedfit 13.345314.005 1/2 Acetal Straight Long Speedfit x Speedfit 9.25JOHN GUEST SPEEDFIT BRASS FITTINGSFEATURES• Available in 1/4” and 3/8”O.D.• Manufactured in brass witha polypropylene collet andfood-grade EPDM o-ring.APPLICATIONS• Coffee brewing equipment.• Beverage dispensing.• Vending machines.ORDER INFORMATION:0844.(Size No.) SPEEDFIT BRASS FITTINGPriceSize No. Tube O.D (in.) Thread Size Each133 1/4 1/4 FFL $5.71153 3/8 1/4 FFL 5.95155 3/8 3/8 FFL 6.13305 1/4 3/4 Garden Hose 10.74HOW TO MAKE A SPEEDFIT “PUSH CONNECT” CONNECTIONSPECIFICATIONS• Max. 150 PSI @ 70°F(10 bar @ 20°C).Max 60 PSI @ 140°F (4bar @ 60°C).Min. 33°F/1°C.030.140.110DISCONNECTING IS JUST AS EASYCut the tube square and push in up to thetube stop. For metal tube, remove burrsand chamfer end to prevent O-ring sealdamage. For soft or thin walled plastictubing we recommend a tube insert.The tube is secure in position. Thestainless steel teeth grip whilst the O-ringprovides a permanent leak proof seal.Ensure the system is depressurizedbefore removing the fitting. Push in thecollet against the face of the housing.With the collet held in this position thetube can be removed.Cartridge grips before it seals. Ensure thetube is pushed up to the tube stop.Pull the pipe to check it is secure. It isgood practice to check the system beforeuse.1-800-848-1141www.rhfs.com93