27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72MASTERFLEX L/S HIGH PURITYTEFLON TUBING PUMPSFEATURES• Excellent chemical compatibility.• Fluid purity maintained.• Low-pulsation flow.• Adjustable occlusion with locking knob.• Continuous-duty.• Variable flow from 1.4 to 65 ml/min.• 100 PSI (6.9-bar) pressure capability.• 1/10-hp, 6-300 RPM continuous-duty drive.• + 1% drive speed accuracy.• IP 53 rated.• 32 to 300°F (0 to 149°C) temp. range.• 8-ft (2.4-m) suction lift.• Six-roller pump head.• Fluids contact only the inside of the tubing, so chemicalexposure or contamination are limited. Rigid PTFE tubing alsolets you pump fluids at higher pressures than conventionaltubing.• Drive pump head, tubing, fittings, and a tubing grooving toolare all included. Anticipate tubing wear — order replacementtubing 6002-215 below.APPLICATIONS• Transfer of aggressive chemicals.• High-purity pumping.• Filtration.• Chemical injection.ORDER INFORMATION:6002.100 L/S PTFE TUBING PUMP, 120 VAC $1,658.75NOTE: Not recommended forpumping fluids with particulates.580.110.140 L/S Pump580.900.110 Accy’s/ToolsREPLACEMENT ITEMSThe pump head, tubing fittings, and grooving tool are allavailable separately. Optimum speed range is 1-300 RPM.6002.215 PTFE TUBING; Set of two 15” (38-cm) $99.99lengths6002.146 PIPE ADAPTER,1/4: NPT(M) x 6 mm OD. 16.25Two required6002.070 TUBING GROOVING TOOL 36.88ACCESSORY ITEMS• Use extension tubing and two straight connectors toextend pump tubing.6002.126 PTFE EXTENSION TUBING; 12 ft(3.5m) $44.44long, 6 mm OD.6002.127 STRAIGHT UNION CONNECTOR. Two 22.50required316SS VARIABLE SPEEDCENTRIFUGAL PUMP SYSTEMFEATURES• Chemical resistant 316 SS pump bodies.• Bushings and O-rings of Teflon ® resist corrosion and promotecontamination-free pumping.• Permanent magnet direct current (PMDC) motor.• Excellent for long term applications.• Pump head is supplied with the drive.SPECIFICATIONS• The 115 VAC models include a 6-ft, three-wire cord withplug. The 230 VAC models include a 6-ft, three-wire cordwith stripped ends.• Wetted materials: 316 SS pump bodies, bushings andO-rings of Teflon ® .• Maximum temperature: 250°F (121°C).ORDER: 6060.(Size No.) VARIABLE SPEED DRIVE PUMP SYSTEMSizeMaxFlowMaxHeadMaxSystem Connections Connections Motor Motor Motor Motor Motor MotorNo. GPM (ft.) Pressure Inlet Outlet hp RPM Type Power Hz Amps L x W x H701 7.0 69.3 30 psi 3/8” FNPT 1/4” FNPT 1/7 9000 PMDC 115 VAC 5060 2.2 8 1/2” X 63/8” 5 1/2”702 7.0 69.3 30 psi 3/8” FNPT 1/4” FNPT 1/7 9000 PMDC 230 VAC 5060 2.2 8 1/2” X 63/8” 5 1/2”Shpg wt Pricelbs (kg) Each8.0 (3.7) $962.508.0 (3.7) 1,037.50640.170.110454