27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

KAMWELD PLASTIC WELDERSREADY WELDERSFEATURES• Have their own air compressors.• Plug it in—It’s ready to use.• Comes with a selector valve forlow, medium or high heat.APPLICATIONS• Maintenance work outdoorsor in, where compressed air isunavailable.• Training in vocational educationcenters.• Plumbing, carpentry, construction,etc.STANDARD READY WELDERThe package includes a built-in air compressor, a welder with a 350Welement, Low/Medium/High selector, round tip and a steel carrying case.ORDER:8505.602 READY WELDER 46-RW $1,057.388506.360 SPARE ELEMENT for 46-RW 105.99HEAVY-DUTY READYWELDERPackage includes a heavy-duty air compressor, a welder with 600W element,Low/Medium/High selector, round tip and steel carrying case.ORDER:8505.702 HEAVY-DUTY WELDER 47-RW 1,230.638506.605 SPARE ELEMENT for 47-RW 109.21DEVICE FOR SHEET BENDING940.110.140 Welders940.110.180 ElementsFEATURES• This tool provides thermoplasticmaterials for forming all-anglebends; complete instructions arefurnished. The heating device hastwo rectangular aluminum heatingbars (top and bottom sections)electrically heated by metalencasedelements to accommodate940.110.150 Alla 1/16” to 1/4” sheet.ORDER:8520.028 HEATING DEVICE, 28” $720.398520.054 HEATING DEVICE, 54” 893.238520.096 HEATING DEVICE, 96” 1,214.42SPECIFICATIONS• Has a stainless steel barrel for standard tips orhigh-speed tools and uses standard element350W, 115 VAC; the heavy-duty welder uses600W, 115 VAC. Its neoprene air hose (16 feetlong) resists oil, ozone, etc., and permits easyhandling while on a ladder.• The built-in diaphragm-pump air compressorproduces the air pressure needed for either 350or 600W heating elements. A selector valveprovides low, medium or high heat. You’ll findthe welder is extremely quiet and trouble-free.• The welder and compressor come in a ruggedsteel carrying case measuring 20” x 9” x 8”. Thepackage weighs only 26 pounds for the standardunit, and 31 pounds for the heavy-duty unit.WELDER ACCESSORIESORDER: 8515.(Size No.)SizeNo.DescriptionPriceEach330 Steel Carrying Case for 8505-602, -702 $122.48005 Steel Carrying Case for all other welders 46.86010 Aluminum Welder Stand (fits all models) 39.76122 Air Regulator 78.38123 Pressure Gauge 53.89940.110.190 AllHIGH-SPEED TOOLSFEATURES• These devices change old-fashioned twohandedwelding into one-handed speed-welding,with rates up to 60”/minute. Once started, therod is fed automatically into the pre-heating tubeby the welder’s motion as it is pulled along thejoint.940.110.160-1708512.(Size No.) STAINLESS STEEL SPEED TOOLSSizeNo. Series KS High-Speed Tools Kamweld ModelPriceEach100 For PVC & CPVC to 5/32” rod, old style long KS-1 OLD STYLE $185.07101 For PVC & CPVC to 5/32” rod KS-1 NEW ST. 151.42103 For LDPE 5/32” rod & smaller KS-1B 151.42104 For PP, HDPE, PVDF to 5/32” rod KS-1C 151.42117 For Type I and II PVC, 1/8” round rod only KS-1-8 123.89118 For PPro, 1/8” round rod only KS-1-8A 123.89201 For PVC & CPVC to 3/16” rod KS-2 162.13203 For LDPE 3/16” rod KS-2B 162.13204 For PP, HDPE, PVDF to 3/16” rod KS-2C 162.13301 For 5/8” plasticized PVC, flat & corner strip for tank linings KS-3 188.13302 For 1” plasticized PVC, flat & corner strip for tank linings KS-4A 240.13401 For type I & II PVC, 1/4” rod KS-6 188.13402 For PP, HDPE and other hi-temp plastics, 1/4” rod KS-6C 188.13501 For triangular PVC rod, equivalent to 1/8” KST-1 140.71504 For triangular PPro rod, equivalent to 1/8” KST-1A 140.71505 For triangular PPro rod, equivalent to 3/16” KST-2C 189.66502 For triangular PVC rod, equivalent to 3/16” KST-2 189.66503 For triangular PVC rod, equivalent to 1/4” KST-3 221.78506 For triangular PPro rod, equivalent to 1/4” KST-3C 221.781-800-848-1141www.rhfs.com603