27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

More documents

Recommendations

Info

<strong>Ryan</strong> <strong>Herco</strong> Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72CPVC FUME DUCT & FITTINGSORDER: 2009.(Size No.) FUME DUCTGray CPVC, 10 ft. lengthsSize No.SizeNom. O.D. (in.) Wall (in.)Lbs. perft.Price/Foot060 6 6.625 .187 2.555 $29.11080 8 8.625 .187 3.349 49.46100 10 10.750 .187 4.192 74.31120 12 12.750 .187 4.986 88.41140 14 14.00 .187 5.485 108.78160 16 16.00 .187 6.273 124.4180 18 18.00 .187 7.580 150.32200 20 20.00 .219 9.415 181.4240 24 24.00 .250 12.536 248.62ORDER: Part No.(Size No.) FUME DUCT FITTINGS, Belled each endPart No.FEATURES• Corrosion resistance: to virtually all acid and caustic fumes.• Glossy smooth: inside and out. Has higher air flow rates due to the glasslikeinside walls. It never needs painting or protection on the outside.• Lightweight: save money normally spent on heavy-duty supports andhangers. It makes installation easier in hard-to-get-to places.INSTALLATIONThe only tools required are very simple: a fine-toothed saw for cutting ductand a paint brush (natural bristle) for applying cement. The duct and ductfittings are joined using the same cementing instructions shown on page 636.For sizing and hanging, simply follow the same good principles used with anyother material, being sure to allow for expansion and contraction.Size (in.) 6 8 10 12 14 16 18 20 24Size No. 060 080 100 120 140 160 180 200 240Description2019 Coupling $64.88 $74.57 $86.49 $98.42 $104.41 $116.31 $128.97 $136.43 $159.572029 Tee 272.70 402.15 570.56 707.82 864.37 1,023.39 1,257.70 1,531.89 2,185.062023 90° Ell 207.23 294.97 418.95 544.23 694.00 856.58 1,087.24 1,367.73 2,071.622025 45° Ell 149.97 197.29 262.83 334.00 414.41 502.77 625.13 768.91 1,131.432032 45° Lateral 404.56 543.66 731.56 890.74 1,071.62 1,264.54 1,549.59 1,890.62 2,720.162027 Cap 152.88 173.17 195.65 221.46 245.25 301.05 378.98 397.02 444.782031 Damper 287.14 354.78 444.66 533.29 618.66 723.75 865.77 1,029.47 1,429.072041 Reducer Coupling (1-step) 127.61 143.97 153.51 163.66 174.10 185.90 398.29 469.57 737.42Other styles and sizes of fittings are available upon request.ASK US ABOUT L.A. CITY APPROVALCPVC FUME DUCT CEMENT – LOW V.O.C.FEATURES• Gray slow-set cement, extra heavy-bodied for large diameter CPVC fumeduct and fume duct fittings.3675.340 CPVC FUME DUCT CEMENT, GRAY, Gallon $118.70CPVC FUME DUCT PRIMER175.110.140 CementFEATURES• This powerful solvent is especially designed to dissolve the surfaces ofCPVC pipe and fittings prior to application of cement.3684.030 CPVC PRIMER, QUART $14.053684.040 CPVC PRIMER, GALLON 47.50Material Safety Data Sheets (MSDS) are sent with all orders of cement and primer. Additionalcopies are available on request.175.110.320 PrimerALSO AVAILABLE205.110.110 CPVC Fume Duct205.110.120 CPVC Fume Duct FittingsBLOWERSBlowers for exhausting corrosivefumes and vapors.See pages 216 and 218for more information.214
SAINT-GOBAIN ALL-PLASTIC LAB BLOWERSFEATURES• Resistant to corrosive vapors.• Quiet operation: below the OSHA 8-hour limit of 90 dbA.• One-year warranty.• Compact.• Come complete with motors—ready to run.• Choice of motors: totally-enclosed fan-cooled or explosionproof.• The steel stands are coated with corrosion-resistantpolyurethane paint.• For indoor and outdoor use.• Includes forward-curved impeller blades for lower-speed,low-noise operation.• Transitions permit easy attachment of industrial bloweroutlets to standard ducting.• Maximum temperature limit of 140°F (60°C).• Protect motors and drives against weather when the blowersare roof-mounted by installing weather hoods on all outdoorvertical blower discharge ducts.• Saint Gobain blowers are supplied fully assembled in acounterclockwise upblast position. Other counterclockwisepositions are available upon request. Positions can bechanged in the field.APPLICATIONS• These blowers are excellent for aggressive applicationswhere blowers can corrode.• While metal blowers rely on protective coatings that developpinholes and pores, these Saint Gobain plastic lab blowersare proven performers in many tough applications such aslab hoods and cabinets, metal finishing, electronics and chipmanufacturing, small-scale chemical manufacturing, water/waste treatment and precious metal recovery.5-5/8” Impeller1725 RPM8” Impeller1140 RPMORDER INFORMATION:2001.(Size No.) 140 to 225 cfm 3/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach075 XP PP/PVC 5-5/8 1725 1/6 115 (1) 35 $1,444.21050 TEFC PP/PVC 5-5/8 1725 1/6 115/208-230 (1) 30 1,252.372001.(Size No.) 360 to 625 cfm 3/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach175 XP PP/FRP 8 1140 1/3 115/230 (1) 55 $1,640.62155 TEFC PP/FRP 8 1140 1/3 115/208-230 (1) 47 1,322.53275 XP PVC/FRP 8 1140 1/3 115/230 (1) 57 2,144.15250 TEFC PVC/FRP 8 1140 1/3 115/208-230 (1) 49 1,652.558” Impeller1725 RPM2001.(Size No.) 710 to 1,025 cfm 1-1/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach150 XP PP/FRP 8 1725 1/3 115/230 (1) 50 $1,553.81100 TEFC PP/FRP 8 1725 1/3 115/208-230 (1) 42 1,247.10255 XP PVC/FRP 8 1725 1/3 115/230 (1) 52 1,881.86200 TEFC PP/FRP 8 1725 1/3 115/208-230 (1) 44 1,577.12NOTE: Do not use the above blowers with chromic, perchloric, concentrated phosphoric, nitric or sulfuric acids. For theseapplications, see the 2005 Blowers with PVC impeller wheels shown on page 216.Blower adapters can be found on page 216.200.110.120 XP, 1/6 HP 200.110.140 XP, 1/3 HP200.110.110 TEFC, 1/6 HP 200.110.130 TEFC, 1/3 HP1-800-848-1141www.rhfs.com215
Page 1 and 2:
www.rhfs.com1-800-848-1141Locations
Page 3 and 4:
GET THE RHFS ADVANTAGE!Extensive Pr
Page 5 and 6:
RYAN HERCO flow solutionsFiltration
Page 7 and 8:
RHFS SERVICE CENTERSCall your most
Page 9 and 10:
NW 87thCt.NW 102nd St.RHFS SERVICE
Page 11 and 12:
SECTIONAL PRODUCT INDEXPage 23TUBIN
Page 13 and 14:
DETAILED PRODUCT INDEXDESCRIPTIONPA
Page 15 and 16:
Page 17:
Page 20 and 21:
Ryan Herco Logo-4 Color ProcessElem
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167: Ryan Herco Logo-4 Color ProcessElem
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644:
Tubing & Tube FittingsInstrumentati
show all

27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?