27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72MARCH SEAL-LESS MAGNETICCENTRIFUGAL PUMPSHEAD IN FEET222018161412108642309(115V - 60 Hz)G.P.M.300 & 305(115V - 60Hz)ball bearingsno capacitor0 2 4 6 8 10 12 14 16CAPACITY TO 10 GPMFEATURES• The -300 and -302 motors on this model areopen fan-cooled.• The epoxy encapsulated model -309 is liquidcooledand is for submerged or open air duty.• All are shaded pole, sleeve and ball bearing,continuous duty and thermal overload protected.• 230 Volt, 50/60 Hz models are also available.• The -305 and -306 continuous-duty, ball bearingmotors, similar to totally enclosed models, havea splash-proof housing with an external fan andshroud, and are thermal overload protected.SPECIFICATIONS• Wet materials of construction: Glass-filledPolypropylene, Buna-N, Viton, ceramic andceramic magnet.ORDER: MAG-DRIVE PUMPAir-Cooled Motors6305.300 OPEN AC, 115V $168.006305.302 OPEN AC, 230V 237.006305.707 WE END KIT for .300, .302 54.00Submersible Motor6305.309 LIQUID-COOLED, 115V $280.006305.717 WET END KIT for .304 68.00The maximum internal pressure is 50 PSI, while themaximum liquid temperature is 190°F on AC and BCmodels, 130° on epoxy models.Splashproof, Blast-Cooled Motors6305.305 BLAST-COOLED, 115V $247.006305.306 BLAST-COOLED, 230V 254.006305.708 WET END KIT for .305, .306 69.50640.110.130640.900.110MotorDimension (in.)Size Max. FlowNo. (gpm) Max. Head Inlet Outlet HP RPM Volts Hertz Phase Watts Amps H W L Pack Wt.300* 10.0 20.5’ 3/4”FPT 1/2”MPT 1/15 3200 115 60 Single 150 2.1 5 4 9-1/8 7 lbs.305* 10.0 20.5’ 3/4”FPT 1/2”MPT 1/15 3450 115 50/60 Single 120 1.7 5 4 9-1/8 8lps.309 8.5. 19’ 3/4”FPT 1/2”MPT 1/20 3200 115 60 Single 120 2.35 5 4-3/4 7-1/4 81/2 lbs.* 302 is same as 300 except 230V; 306 is same as 305 except 230V. Above models also available with air motors. Contact RHFS for more information.HEAD IN FEETHEAD IN FEET22201816141210864-400, -405SEAL-LESS MAGNETIC DRIVECAPACITY TO 14 GPMFEATURES• The -400 and -402 motors are open fan-cooled,while models -405 and -406 are splash-proofand blast-cooled.• All have a permanent split capacitor, sleevebearings, and are continuous duty, thermaloverload protected, and run on 50/60 Hz.*20 2 4 6 8 10 12 14 16G.P.M.SPECIFICATIONS• Wet materials of construction: Glass-filledPolypropylene, Buna-N, ceramic, Viton andceramic magnet.• The maximum internal pressure: 50 PSI.• Maximum liquid temperature: 190°F.640.110.140ORDER: MAG-DRIVE PUMP6305.400 SINGLE-PHASE, $227.006305.402 SINGLE-PHASE, 249.706305.709 WET END KIT for .400, .402 62.506305.405 SINGLE-PHASE, 260.006305.406 SINGLE-PHASE, 286.006305.710 WET END KIT for .405, .406 89.50MotorDimensions (in.)Size Max. Flow Max.No. (gpm) Head Inlet Outlet HP RPM Volts Hertz Phase Watts Amps H W L Pack Wt.400* 14 21.5’ 1” FPT 1/2” MPT 1/12 3450 115 50/60 Single 150 1.3 5-5/8 5-1/8 10 8-1/2 lbs.405* 14 21.5’ 1” FPT 1/2” MPT 1/12 3450 115 50/60 Single 150 1.3 5-5/8 5-1/8 10 10 lbs.* The 402 is the same as .400 except it runs on 230V; 406 is the same as 405 except it runs on 230V.Above models are also available with air motors; contact RHFS for more information.468