27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

MICROPUMPMAG-DRIVE GEAR PUMPSGPMORDER:6074.604 SERIES 200 GEAR PUMP, Ryton Gears $834.00PSIG100806040200 .2 .4 .6 .8 1.0600.130.110 AllCONTINUOUS DUTY/2-GEARFEATURES• The unit shown is a twogearmodel coupled to a.052 HP, 3000 RPM motor,thermally protected, thatmay be run continuously.• Air, explosion-proof andvariable speed motors arealso available.PUMP SPECIFICATIONS• 316 series SS.• Viton seals, Ryton Gears.• Adjustable Bypass.• 1/8 FNPT Side Ports.• Pump/Motor weight: 6.75pounds.MOTOR SPECIFICATIONS• TEFC Shaded-Pole InductionMotor.• 115/230 VAC Single Phase1/20 HP.• 50/60 Hz, 3,000 RPM, 1.7/.85Amp.• Thermally Protected.GPMORDER:6075.645 SERIES 201 GEAR PUMP, Ryton Gears $1,104.00PSIG20016012080402-GEAR3-GEAR0 1.0 2.0 3.0GPMORDER:6051.646 SERIES 220 GEAR PUMP, 2 Ryton Gears $1,422.006052.646 SERIES 221 GEAR PUMP, 3 Ryton Gears 1,544.00PSIG100806040200 .2 .4 .6 .8 1.0600.130.110 All600.130.110 AllCONTINUOUS DUTY/3-GEARFEATURES• Three-gear pump coupledto a 3000 RPM motor. Theresult is twice the flow ofthe two-gear model above.• This unit is also thermallyprotected and can be runcontinuously.PUMP SPECIFICATIONS• 316 series SS.• Viton seals, Ryton Gears.GREATER FLOWFEATURES• This heftier pump with twoor three gears utilizes theSeries 220 pump headcoupled to a 1/4 HP 3200RPM TEFC motor. Its flowrates go to 3 GPM, and themaximum static systempressure to 1,000 PSIG.PUMP SPECIFICATIONS• 316 SS.• Viton seals, Ryton gears.• Adjustable Bypass.• 1/8 FNPT Side Ports.• Pump/Motor weight: 8.25 pounds.MOTOR SPECIFICATIONS• Permanent Split Capacitor.• Totally enclosed Fan cooled.• .162 HP 115/230 VAC 50/60Hz.• Single Phase, 3,000 RPM.• 3/8” FNPT Side Ports.• Pump/motor weight: 11.1pounds.• No adjustable by-pass.MOTOR SPECIFICATIONS• Permanent split capacitor.• 115 VAC, TEFC.• .25 HP, 3200 RPM.• 3.05A.• Also available in 230 VAC, Airand Explosion-proof Motors.NOTE: RHFS advises you to properly protect dischargeplumbing from overpressure by providing an externalpressure relief or bypass valve connected to thedischarge piping as close to the pump as possible.LOOKING FOR VARIABLE SPEED DRIVESFOR YOUR MICROPUMP?A variety of variable speed pump drives designed specifically forMicropump pump heads are available. See page 451 for details.1-800-848-1141www.rhfs.com449